Specifications

primary spraybooth extract filter applied to painting industries
small resistance &high effiency
variety of sizes

                                                 primary spraybooth extract filter

 

 

Specification:

 

Model	PA-50/60	PA-100
Avg.arrestance(acc.EN779)	92%-96%	97%-99%
Initial pessure drop	15Pa	20Pa
Final pessure drop	250Pa	280Pa
Air velocity	0.7-1.75m/s	0.7-1.75m/s
Dust holding at tested final	3200-3600 g/	3600-4900g/
Temp.resistance,const	170	170
Temp.short peaks	190	190
Normal thickness	50/60mm	100mm
MRoll sizes standard	0.8*20  1.0*20   2.0*20	0.8*20  1.0*20   2.0*20

 

 

 

Speciality:

1)         Made of long fibreglass in non-woven way,large ventilation quantity,small resistance, good efficiency of the dust arrestance for the over-spray.

 2 )       It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching, specially , PA-50/60/PA-100 is suitable for using heat recovery system

3 )        High strength fibreglass increasing structure;the windward side is green ,the leeward side is white..

 4 )      The low compression performance maintains its outlook,which is completely useful for the filtration fibre to keep the oil mist and the dust

5 )     Nonflammability, heat resistance 170 temperature

6 )        The compression packing may save the fare and the storage space in the transportation.After decompression, it will regain its original condition

7 )        Outer frame  may choose the paper frame , the galvanization iron frame,or aluminium alloy frame.