Specifications

1.air filter foam
2.high air flow rate
3.low inital pressure drop
4.high dust holding capacity
5.long operating life

Fibreglass filter media(fiberglass filter,fiber glass)

Model	PA-50/60	PA-100
Avg.arrestance(acc.EN779)	92%-96%	97%-99%
Initial pessure drop	15Pa	20Pa
Final pessure drop	250Pa	280Pa
Air velocity	0.7-1.75m/s	0.7-1.75m/s
Dust holding at tested final	3200-3600 g/	3600-4900g/
Temp.resistance,const	170	170
Temp.short peaks	190	190
Normal thickness	50/60mm	100mm
MRoll sizes standard	0.8*20  1.0*20   2.0*20	0.8*20  1.0*20   2.0*20

 

 

Speciality:

1) Made of long fibreglass in non-woven way,large ventilation quantity,small resistance, good efficiency of the dust arrestance for the over-spray.

2) It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching, specially , PA-50/60/PA-100 is suitable for using heat recovery system

3) High strength fibreglass increasing structure;the windward side is green ,the leeward side is white..

4) The low compression performance maintains its outlook,which is completely useful for the filtration fibre to keep the oil mist and the dust

5) Nonflammability, heat resistance 170 temperature

6) The compression packing may save the fare and the storage space in the transportation.After decompression, it will regain its original condition

7 ) Outer frame  may choose the paper frame , the galvanization iron frame,or aluminium alloy frame.

 

Using:

1 ) Thick dust filtration for the general air-condition system.

2  ) Applied to the dry spray painting platform and the exchaust gas system of the automobile spray paintting room.It is environment-friendly, reducing the pollution to the  environment

 

Remark:Wide variety of sizes and thickness Fibregalss fliter media