Electric Parturition Bed

Model:MC-OB-09B

1.General Description:

This bed is designed for women’s parturition and gynecological operation. It’s raising and lowering by the advanced electrical handspike, the movement of table-board includes front and back lean, the back section fold. It is easy to operate,the inserted assitant table and size can be disassembled, so it is easy to operate for doctors.

2.  Specifications:

Dimensions of Table Top:

Overall length…………………………………………………………………1250mm

Width…………………………………………………………………………600mm

Leg section is detachable

Dimensions of Leg Section:

Length……………………………………………………………………………650mm

Width……………………………………………………………………………600mm

Table Top from floor:

Max. Height……………………………………………………………………990mm

Min. Height………………………………………………………………………750mm

Adjustments of Sections:

Back section raised from the horizontal…………………………………≥65°

Back section lowered from the horizontal…………………………≥10°

Reversed Trendelenburg…………………………………………………………≥10°

Trendelenburg……………………………………………………………………≥30°

Supple: AC220±10%,50Hz

Device safety sort:I    B

3. Parturition bed composition:

The parturition bed is composed of the mechanism and the electrical control system.

The mechanism is composed of the bed body, the leg frame, the contaminative basin, the auxiliary equipment and so on, the electric appliance control system is composed of inside controller, the transmission system, handle controller and so on.

4. Operation Instruction:

1)The ascending and descending movements of the table top are all electrically operated. It has a moving controlling push button container attached. The controlling push button are all dot buttons, when the necessary button is rushed, the corresponding motor will work, when the button is not puessde, all movements stop.

2) The Back section bending upward and downward and Reversed Trendelenburg and Trendelenburg of the table-top are controlled by a pair of hand wheels .

3) In addition to general decubital function, the parturition bed also can be adjusted seat posture so as to adjust various childbearing body postion, it can be changed into parturition bed as needed in the process of childbearing, don't need to move a pregnant woman, so it can reduce the pregnant woman's disease bitterness and improve the space utilizatin of the hospital.

4) The contaminative basin can prevent the amniotic fluid leaks, it is easy to assemble and disassemble

5)  The design of the seat section causes doctor to be easier to close to pregnant woman, so it is easy to operate

6) The motion idler wheel is installed in the pedestal of the Parturition Bed, it can be locked to the ground when trampling the side pedal, it can move around when tramping the other side pedal.

7)  Electric operating table mattresses are produced by the high-density sponge covered leatherette materials, with antistatic properties.

8) The Company will be able to provide circuit draws in accordance with users’ needs.

5. Accessories:

6.Cautions:

1) Lubricating oil should be added to every active part, so that the bed can be operated easily and prolong their life. Smear Vaseline over the tracks of the accessories on each side of the bed and the racks under the table, thus preventing it from being rusty.

2) Before putting into use, all attachments should be checked to see if they are locked

securely so as to prevent them from loosing or sliding off while used.

3) As the bed has many parts, keep all the accessories in good order.

4) keep the bed and accessories clean and prolong their life.

5) The ground must be kept dry. While the floor is washed and scrubed, please try not to make water spill into the plate or on the rotated wheels, thus preventing it from being rusty.

6)Put the bed in dry place to avoid the electric controlling devices being wet and being damaged.

7)  Keep the button container dry and clean to avoid current leakage. Keep it in the proper place after being used.

8) The product can electrically operate 2 movements. These movements must be operated separately. Attention: the product is supplied by single-phase alternating current (220V, 50Hz), tri-socket .Fuse plug rating is 2A .Please carefully inspect socket to insure reliable earth; shut off power while stop perform. When trouble happen please inform company /agency to assign engineer overhaul, don’t overhaul by yourself. Don’t press cables avoiding to damage cable or isolation during usage.  

9) It must be repaired and kept clean regularly once a year.

10) The replacement parts during Electric parturition bed normal using period, has been confirmed scrapped (unable to use), should be handled according to the classification (recyclable and non-recovery).

11) The service life for Electric parturition bed issevenyears. If it is used in expired period, it maybe led to wearing and corrosion of some mechanical parts, and had a negative influence upon the mechanical intensity. The patients maybe suffered. So the operating table should be used in the regular maintenance and during safety using period.

12) Electric parturition bed must be used on the antistatic ground.

Warning: electric parturition bed coupled with high-frequency surgical equipment for use, it is possible for the operator and patients to be burned.

7,Cleaning, disinfection and sterilization

1,Washing the operating table with water is prohibited.

2,Clean operating table with a soft cloth, sponge, wet cloth or detergent. Not use a hard brush, steel wire brush, decontamination powder, paint, ether, bananas water, acid-base solution to any surface.

3,Mattress must be disinfection with alcohol, ether, ultraviolet disinfection and so on (abandoning high-temperature disinfection).

8,Environmental condition

Transportation and stockpile environmental conditions

a)Environmental temperature:-40℃~+55℃.

b)Relative humidity:≤80%.

c)Atmospheric pressure:50kPa~106kPa.

Moving environmental conditions

a)Environmental temperature:5℃~40℃.

b)Relative humidity:≤70%.

c)Atmospheric pressure: 70.0kPa~106.0kPa.

d)Supply voltage: AC220V,50Hz±1 Hz

This device in package should be stored indoor with a relative humidity less than 80%, no erosive air and good ventilation is required. No side-sloping.

It can be shipped in regular transportation without crash, oscillation, rain or direct sunlight.