Stainless steel 304 Milk Powder Conveyor & Vibrating hopper feeder
USD $2,000 - $2,000 /Set
Min.Order:1 Set
With Vibrating Hopper Auger Screw Feeder/Conveyor
I. General Description:
This machine can convey many different materials, like dry powder, such as coffee, wheat flour, condiment and it also fits for some small batches. Combining with the packaging machine of our company, we can present you situation tracing with the above material. It can also be used separately. The whole machine is made of stainless steel of 304 except for the power.
II. Characteristics
1,The vibrating screw feeding machine equips with double motors:feeding motor and vibrating motor, each of them has its own switch control.
2,Once starts the switch,the hopper would be in continuously vibration which makes the material flow easily and convective. and with different requirement,the size can be changed X cor made according to customer’s requirement.
3,The hopper separates from the twisting shift, designing with the reasonable structure, each part of the conveyor can be taken down easily.
4,With dust-proof characteristic, the hopper won’t be glued or polluted by dust and powder. And the complete machine is made of Ss304 except for the motor.
5,with specific design,it’s very easily and convenient to clean up the residue and leftover,also this equipment can discharge the material reversely, and the storing materials at the bottom of hopper pipe can be easily released from the door once starting the switch.
III.Technical Parameter
Main specification | HZ-2A2 | HZ-2A3 | HZ-2A5 | HZ-2A7 | HZ-2A8 | HZ-2A12 |
Charging capacity | 2m3/h | 3m3/h | 5m3/h | 7m3/h | 8m3/h | 12m3/h |
Diameter of pipe | Φ102 | Φ114 | Φ141 | Φ159 | Φ168 | Φ219 |
Hopper volume | 100L | 200L | 200L | 200L | 200L | 200L |
Power supply | 3P AC208-415V 50-60Hz | |||||
Total power | 610W | 810W | 1560W | 2260W | 3060W | 4060W |
Total weight | 100kg | 130kg | 170kg | 200kg | 220kg | 270kg |
Overall dimensions of hopper | 720*620*800mm |
1023*820*900mm | ||||
Charging height | Standard1.85m,1-5m could be designed and manufactured | |||||
Charging angle | Standard45 degree,30-60 degree are also available |
IV.Main Parts
Part 1. Motor:
Two motors:
one for screw feeding, one for hopper's vibrating
Part 2. Door for material's releasing:
With opening door at the bottom of the screw for material's releasing.
Part 3.Protector and Screw auger:
In the feeding mouth it have safety cover, Prevent fall into impurity
Five.Actual use
Our workshop
Our aptitudes
Company’s promise
Devoting to provide top, consistent and high-quality production;
Pursuing for presenting excellent, reliable and most sincere service with
customers, and offer long-term technical consultation service after dealing.
Terms of payment:
30% of total amount should be pre-paid and then the contract becomes effective.
When the equipment is finished, the buyer comes to the seller’s factory to check the
equipment. Balance 70% should be paid before the seller delivers the goods.
Time of delivery:
When the contract becomes valid, the machine should be delivered within 25-35
days after the receipt of the down payment. transportation is exclusive. And the
equipment will be in normal operation after Time debugging within one week
after arrival.