Product Details

AC Servo Motor and Servo Driver 110mm, 2500rpm, 1200W-1800W OEM

Ac Servo Motor 110mm

Part I 110MST series ac servo motor

1. Specification

Motor model	110MST-04030				110MST-05030							110MST-06020						110MST-06030
Rated power (KW)	1.2				1.5							1.2						1.8
Matched driver	MST-1230A				MST-1230A							MST-1230A						MST-1230A
Rated voltage (V)	220				220							220						220
Rated current (A)	5				6							4.5						6
Rated speed (rpm)	3000				3000							2000						3000
Rated torque (N.m)	4.0				5.0							6.0						6.0
Peak torque	12				15							12						18
back emf	54				62							83						60
Torque coefficient	0.8				0.83							1.3						1.0
Rotor inertia (Kg.m²)	0.54×10 -3				0.63×10 -3							0.76×10 -3						0.76×10 -3
Winding resistance (Ω)	1.09				1.03							1.46						0.81
winding inductance	3.3				3.43							4.70						2.59
Electrical time constant	3.0				3.33							3.2						3.2
Weight	5.5				6.1							6.7						6.7
Encoder wires count	2500				2500							2500						2500
Motor insulation level	Class B(130℃)
Defend level	IP64
Operation environment	Environment temperature, environment moisture, frost-free knot
Motor winding rocket	Winding wire	U (red)				V (yellow)					W (blue)					PE (Olivine/black)
	Socket number	2				3					4					1
Encoder socket	Signal wire	5V	0V	A+	B+	Z+	A-	B-	Z-	U+			V+	W+	U-		V-		W-	PE
	Socket number	2	3	4	5	6	7	8	9	10			11	12	13		14		15	1

Ac Servo Motor 110-2

2. Ac Servo Motor 110MST series Installation size

Torque(N.m)	4	5	6
LA	189	204	219
LB	55	55	55
LC	5	5	5
LD	12	12	12
LE	95	95	95
LF	110	110	110
LG	130	130	130
LZ	9	9	9
S	19	19	19
H	21.5	21.5	21.5
W	6	6	6

3. Cautions for Ac Servo Motor

1. Please don’t hard knock the ac servo motor when Install and teardown motor, in case break encoder

2. Please try to avoid the axis seat shake, in case break the bearings.

Ac Servo Driver

Part II Servo Driver for AC Servo Motor

Model: MST-1210A/1220A/1230A/1250A/1350A

Special:

1. Customized service: OEM/ODM

2. Provided Low-voltage Servo Driver, Middle-end and High-end Servo Driver

Feature:

1. Incremental photoelectric encoder 2500 line, high positioning accuracy, rotary positioning accuracy can reach 1/10000 r

2. Speed than the big, 00 to 1:50, from low to high speed stable torque characteristics;

3. The highest a high-speed FPGA processing, motor velocity 5000 RPM;

4. Rich complete parameter Settings, different ways of working can be configured and running characteristics, so as to adapt to different requirements;

5. Have the position, speed, torque control mode, the application range;

6. Using intelligent control algorithm of space vector (SVPWM), greater than traditional SPWM generate the noise of the moment and smaller;

7. Up to three times the overload design, stronger load ability;

8. Perfect protection function: over current, over voltage, overheating and encoder failure, etc.;

Parameter:

Input Voltage	AC220V -15%~+10%
Current	10A	20A	30A	50A
Matching Motor	≤400W	400W-750W	750W-1500W	2000W-3800W
Using Temperature	Work:45℃ Storage:-40℃~55℃
Relative Humidity	40%~80% with no condensation
Atmosphere	86-106kpa
Control Mode	1.Position control 2.JOG control 3.Speed control 4.Torque control 5.Position and speed control 6.Inside pulse control 7.Electric tool carrier control
Pulse Command	7.Pulse+ Direction 2.CW + CCW Pulse 3. Two-phase AB orthogonal pulses
Control Precision	0.01%
Response Frequency	≤200Hz
Pulse Frequency	≤500kHz
Speed Ratio	1:5000
Regenerative Brake	Internally Installed
Electronic Gear	1/30000~30000/1
Overload Capacity	≤300%
Feedback Pulse	2500p/r, Frequency division can be set arbitrary within 0-128
Display Function	Motor speed, motor current, motor torque, motor position, the position deviation, the number of command pulses, the pulse frequency, the straight-line speed, input and output diagnostic
Protection Function	Over speed, over current, overvoltage, under voltage, overload, super bad, encoder fault, the temperature is too high, the internal chip failure, module failure

Dimension

External Connection Diagram for Ac Servo Motor and Servo Driver

Ac Servo Motor link

1. Ac Servo Motor for Milling CNC Controller

http://preview.china.cn/product/60324071502-801849542/New_MST_8140S_cnc_milling_controller.html

http://preview.china.cn/product/60317351177-801849542/Factory_supply_CNC_precision_milling_machine_CNC_Controllers.html

2. Ac Servo Motor for Lathe CNC Controller

http://preview.china.cn/product/60312836950-801849542/2015_New_Produce_high_quality_cnc_lathe_controller.html

http://preview.china.cn/product/60302062471-801849542/CNC_Lathe_Controller.html

3. Ac Servo Motor for Plasma/Flame Cutting Controller

http://preview.china.cn/product/60316167100-801849542/High_quality_3_Axis_step_plasma_cutting_cnc_cutting_controller_with_high_quality.html

4. Ac Servo Motor for Injection Molding Machine Controller

http://preview.china.cn/product/60329525636-801849542/Specifically_designed_168MIPS_processor_high_quality_injection_molding_machine_controller.html

International Express, by air/sea

Our Services