Product Details

Best quality 130mm flange 2500rpm 4nm AC servo motor 1KW

Ac Servo Motor 130mm

2. Ac Servo Motor130MST series Installation size

3. Cautions for Ac Servo Motor

1. Please don’t hard knock the servo motor when Install and teardown motor, in case break encoder

2. Please notice the concentricity between motor axis and bearing axis when installation

3. Please try to avoid the axis seat shake, in case break the bearings.

Ac Sevo Motor 130mm

Part I 130MST series ac servo motor

1. Specification

Motor model	130MST-06025				130MST-07725				130MST-10025					130MST-15015					130MST-15025
Rated power (KW)	1.5				2.0				2.6					2.3					3.8
Matched driver	MST-1230A				MST-1250A				MST-1250A					MST-1250A					MST-1350A
Rated voltage (V)	220				220				220					220					220
Rated current (A)	6				7.5				10					9.5					13.5
Rated speed (rpm)	2500				2500				2500					1500					2500
Rated torque (N.m)	6				7.7				10					15					15
Peak torque	18				22				25					30					30
back emf	65				68				70					114					67
Torque coefficient	1.0				1.03				1.0					1.58					1.11
Rotor inertia (Kg.m²)	1.26×10 -3				1.53×10 -3				1.94×10 -3					2.77×10 -3					2.77×10 -3
Winding resistance (Ω)	1.21				1.01				0.73					1.1					0.49
winding inductance	3.87				2.94				2.45					4.45					1.68
Electrical time constant	3.26				3.80				3.36					4.05					3.43
Weight	8.9				10				11.5					14.4					14.4
Encoder wires count	2500				2500				2500					2500					2500
Motor insulation level	Class B(130℃)
Defend level	IP65
Operation environment	Environment temperature: -20℃~+50℃, Environment moisture<90% frost-free knot
Motor winding rocket	Winding wire		U (red)					V (yellow)				W (blue)					PE (Olivine/black)
	Socket number		2					3				4					1
Encoder socket	Signal wire	5V		0V		A+	B+	Z+	A-	B-	Z-		U+		V+	W+		U-		V-	W-	PE
	Socket number	2		3		4	5	6	7	8	9		10		11	12		13		14	15	1

Ac Servo Driver

Part II Servo Driver for AC Servo Motor

Model: MST-1210A/1220A/1230A/1250A/1350A

Special:

1. Customized service: OEM/ODM

2. Provided Low-voltage Servo Driver, Middle-end and High-end Servo Driver

Input Voltage	AC220V -15%~+10%
Current	10A	20A	30A	50A
Matching Motor	≤400W	400W-750W	750W-1500W	2000W-3800W
Using Temperature	Work:45℃ Storage:-40℃~55℃
Relative Humidity	40%~80% with no condensation
Atmosphere	86-106kpa
Control Mode	1.Position control 2.JOG control 3.Speed control 4.Torque control 5.Position and speed control 6.Inside pulse control 7.Electric tool carrier control
Pulse Command	7.Pulse+ Direction 2.CW + CCW Pulse 3. Two-phase AB orthogonal pulses
Control Precision	0.01%
Response Frequency	≤200Hz
Pulse Frequency	≤500kHz
Speed Ratio	1:5000
Regenerative Brake	Internally Installed
Electronic Gear	1/30000~30000/1
Overload Capacity	≤300%
Feedback Pulse	2500p/r, Frequency division can be set arbitrary within 0-128
Display Function	Motor speed, motor current, motor torque, motor position, the position deviation, the number of command pulses, the pulse frequency, the straight-line speed, input and output diagnostic
Protection Function	Over speed, over current, overvoltage, under voltage, overload, super bad, encoder fault, the temperature is too high, the internal chip failure, module failure

Dimension

External Connection Diagram for Ac Servo Motor and Servo Driver

Packaging & Shipping

Ac Servo Motor link

1. Ac Servo Motor for Milling CNC Controller

http://preview.china.cn/product/60324071502-801849542/New_MST_8140S_cnc_milling_controller.html

http://preview.china.cn/product/60317351177-801849542/Factory_supply_CNC_precision_milling_machine_CNC_Controllers.html

2. Ac Servo Motor for Lathe CNC Controller

http://preview.china.cn/product/60312836950-801849542/2015_New_Produce_high_quality_cnc_lathe_controller.html

http://preview.china.cn/product/60302062471-801849542/CNC_Lathe_Controller.html

3. Ac Servo Motor for Plasma/Flame Cutting Controller

http://preview.china.cn/product/60316167100-801849542/High_quality_3_Axis_step_plasma_cutting_cnc_cutting_controller_with_high_quality.html

4. Ac Servo Motor for Injection Molding Machine Controller

http://preview.china.cn/product/60329525636-801849542/Specifically_designed_168MIPS_processor_high_quality_injection_molding_machine_controller.html

Our Services