Specifications

OD:25-356mm
WT:4-70mm
standard:ASTM,JIS,GB,ect...
main markets:south america,Estern europe,southeast Asica,ect

1) Material and Application:20MnV6, mechanical tube.    

 

2) Chemical composition and permissible tolerance(%):

Grade	C	Si	Mn	P	S	Cu	Ni	Cr	Mo	V
20MnV6	0.17/0.23	0.15/0.50	1.30/1.70	≤0.025	≤0.035	≤0.25	≤0.30	≤0.30	≤0.10	0.10/ 0.15
permissible tolerance	±0.02	±0.02	±0.04	±0.005	±0.005	—	—	—	—	±0.03

 

 

 

 

3) Dimension tolerance :

OD:±1%, WT: ±10%

The tolerance value above mentioned should be determined based on the nominal dimension.   

 

4) Straightness: :

Max 3mm over 1000mm for OD<φ180mm, and max 4mm over 1000mm for OD>φ180mm.

 

5) Macro-structure:

General Porosity≤2.5 level, Segregation≤2.5 level.  

 

6) Mechanical properties (as hot rolled):

 

GRADE	Yield Strength	Tensile Strength	Elongation	Charpy (V) Impact Test	Hardness
	Rp0.2(Mpa)	Rm(MPa)	A(%)	J (-20°C)	BHN/HBW
20MnV6	≥420	≥620	≥18	≥27	180—260

7) Surface quality:

Surface of the material should be free of defects such as cracks, overlapping, blowhole, scabs, skin slag etc.. Other defects with the depth limited into the WT minus tolerance can be accepted. 

8) Delivery condition: hot rolled.

9) Any matters occurred during production and transactions will be amiably settled down by both parties. 

IF this product is not the product you need ,welcome to our company's webset to search the product you wanted.

our company webset:http//

any of our products intereste you,please comtact us.