50% SILVER FLUX CORED BRAZING WELDING WIRE

Factory No.:HZ-Ag50F

NOMINAL COMPOSITION

Silver 50.0% ± 1.0%

Copper 20.0% ± 1.0%

Zinc 28.0% ± 2.0%

Nickel 2.0% ± 0.5%

Total Other Elements 0.15% max.

PHYSICAL PROPERTIES 

Color Yellow White

Solidus (Melting Point) 1220°F (660°C)

Liquidus (Flow Point) 1305°F (705°C)

Specific Gravity 9.17

Density (Troy oz./cu.in.) 4.83

Electrical Conductivity (% IACS) 15.00

Electrical Resistivity (Microhm-cm) 11.95

Recommended Brazing Temp. Range 1330°-1500°F (720° - 815°C)

USES

HZ-Ag50F readily wets nickel and iron base alloys. It is recommended for joining 300 Series stainless steel and will retard interface corrosion in most exposures for which the base metals are suitable. Because this alloy is cadmium-free, it can be safely used on food handling equipment and hospital utensils. The presence of nickel in HZ-Ag50F aids in the joining of small tungsten carbide inserts in cutting tools. 

BRAZING CHARACTERISTICS

HZ-Ag50F is very fluid at its flow point and will quickly fill long, narrow joints. Its low flow point will minimize oxidation of the stainless steel during brazing.

After-sale Service Warranty

1)If any quality problems such as manufacture, function or procedure occur within the guarantee period, We shall take responsibility and bear some theconomic losses.

2)If any quality problems such as occur within the guarantee period, we shall provide on line service after receive the buyer’s notice in 24 hours .

3)We will provide a lifetime favorable price to the buyers.