Product Details

CE RoHS CCC factory outlet S-60-12 60W 12V 5A for 3D printer switching power supply

60W Single Output Switching Power Supply S-60 series

Features:
High efficiency, high reliability
Universal AC input / Full range
100% full load burn-in test
Protection: Short circuit / Over load / Over voltage
Fixed switching frequency at 37KHz
Cooling by free air convection
2 years warranty

Model	S-60-5	S-60-12	S-60-15	S-60-24	S-60-48
DC Voltage	5V	12V	15V	24V	48V
Rated Current	12A	5A	4A	2.5A	1.3A
Current Range	0-12A	0-5A	0-4A	0-2.5A	0-1.3A
Rated Power	60W	60W	60W	60W	62W
Ripple & Noise	120mVp-p	120mVp-p	150mVp-p	150mVp-p	200mVp-p
Voltage Adj. Range	-5%, +10%	±10%	±10%	±10%	±10%
Voltage Tolerance	±2%	±1%	±1%	±1%	±1%
Setup, Rise, Hold Up Time	800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC at full load

INPUT
Voltage Range	85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC
AC Current	2A/115V 1A/230V
Efficiency	73%	76%	77%	79%	80%
Inrush Current	Cold start 30A/115VAC 60A/230VAC
Leakage Current	<3.5mA/240VAC

PROTECTION
Over Load	135%~165%
	Protection type: Fold back current limiting, recovers automatically after fault condition is removed.
Over Voltage	115%~135%
	Protection type: hiccup mode, recovers automatically after fault condition is removed.

ENVIRONMENT
Working Temp., Humidity	-10℃~+60℃; 20%~90%RH
Storage Temp., Humidity	-20℃~+85℃; 10%~95%RH
Vibration	10~500Hz, 2G 10min./1cycle,period for 60min, each long X, Y, Z, axes

SAFETY
Withstand Voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

STANDARD
Safety Standard	Design refer to UL1012, UL1950, TUV EN60950
EMC Standard	Design refer to EN55022, EN61000-3-2, -3, EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN55024

OTHERS
Dimension	1599738mm(LWH)
Weight	0.51Kg
Packing	24pcs/13.1Kg/0.7CUFT

NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Specification

S-15-12 S-25-12 S-35-12

S-50-12 S-60-12 S-75-12

S-100-12 S-120-12 S-145-12

S-150-12 S-200-12 S-250-12 S-300-12

S-350-12 S-400-12 S-500-12