Product Details

Specifications

triple output transformer
1.Warranty:2 years
2.Certification:CE RoHS CCC
3.Over load protection
4.LED indicator

triple output transformer

Specification:

30W Triple Output Switching Power Supply T-30 series

Features:
High efficiency, high reliability, low cost
AC input range selected by switch
Protections: Short circuit/ Over load
LED indicator for power on
Cooling by free air convection
Fixed switch frequency at 23KHz

SPECIFICATIONS
OUTPUT
Model	T-30A			T-30B
Output number	CH1	CH2	CH3	CH1	CH2	CH3
DC Voltage	5V	12V	-5V	5V	12V	-12V
Rated Current	3A	1A	0.5A	3A	1A	0.5A
Current Range	0.5-3A	0.1-1A	0.1-0.5A	0.5-3A	0.1-1A	0.1-0.5A
Rated Power	30W	30W	30W	33W	33W	33W
Ripple & Noise	50mVp-p	100mVp-p	50mVp-p	50mVp-p	100mVp-p	100mVp-p
Voltage Adj. Range	CH1: -5%, +10%			CH1: -5%, +10%
Voltage Tolerance	±2%	+2%,-6%	+2%,-10%	±2%	+2%,-6%	±6%
Setup, Rise, Hold Up Time	200ms,100ms,30ms at full load

INPUT
Voltage Range	85~132VAC/170~264VAC selected by switch 47~63Hz; 40~370VDC
AC Current	0.8A/115V 0.45A/230V
Efficiency	70%			72%
Inrush Current	Cold start 18A/115V 36A/230V
Leakage Current	<0.75mA/240VAC

PROTECTION
Over Load	105%~150%
	Protection type: Fold back current limiting, recovers automatically after fault condition is removed

ENVIRONMENT
Working Temp., Humidity	-10℃~+60℃; 20%~90%RH
Storage Temp., Humidity	-20℃~+85℃; 10%~95%RH
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY
Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

STANDARD
Safety Standard	Design refer to UL 1012
EMC Standard	Design refer to FCC Part15 J Conduction Class A

OTHERS
Dimension	1299838mm(LWH)
Weight	0.42Kg
Packing	30pcs/13.6Kg/0.86CUFT

NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation