Specifications
Chiller, control the grind machine to lower temperature and make sure the machine works better.
Item | Model | 1000 | Remarks |
Cooling Capacity | KW | 25000 | Contain early effect, in effect, high efficient air filters, simultaneously equipped with 1200Pa strengthened capacity of power supply fan inside. Controller can print temperature calculation so that it is convenient to management for users. Water pump can be equipped by users own. |
Compressor | Quantity(set) | 1 | |
Cooling Input Power(KW) | 7.5 | ||
Cooling operating current(KW A) | 18 | ||
Whole machine power | KW | 11 | |
Whole machine current | A | 20.92 | |
Condenser | Type | Stainless steel thermal transducer | |
Cooling water flow rate(L/min) | 120 | ||
Water pipe interface | DN40 | ||
Evaporator | Type | Finned heat exchanger of copper pipe and aluminum foil expansion closely type
| |
Fan motor(W) | 1650 | It also can entrust manufacturers to make central temperature 25 degrees and leaving air temp of cooler about 20 degrees below zero in the unit.
| |
Air volume( m³/h) | 12000 | ||
Cooling water pump | Type | Centrifugal pump | |
Input power (W) | 1500 | ||
Outer engine liftmH20 | 26 | ||
Safety protection device High and low pressure protection, current overload protection , phase protection etc. | |||
Overall size | Length (mm) | 2400 |
|
Width (mm) | 800 |
| |
Height (mm) | 1650 |
| |
Freezer data sheet
Item | Model | 1500 | Remarks |
Cooling Capacity | KW | 37500 | Contain early effect, in effect, high efficient air filters, simultaneously equipped with 1200Pa strengthened capacity of power supply fan inside. Controller can print temperature calculation so that it is convenient to management for users. Water pump can be equipped by users own. |
Compressor | Quantity(set) | 1 | |
Cooling Input Power(KW) | 12.5 | ||
Cooling operating current(KW A) | 22.67 | ||
Whole machine power | KW | 14.9 | |
Whole machine current | A | 27.92 | |
Condenser | Type | Stainless steel thermal transducer | |
Cooling water flow rate(L/min) | 167 | ||
Water pipe interface | DN50 | ||
Evaporator | Type | Finned heat exchanger of copper pipe and aluminum foil expansion closely type
| |
Fan motor(W) | 1650 | It also can entrust manufacturers to make central temperature 25 degrees and leaving air temp of cooler about 20 degrees below zero in the unit.
| |
Air volume( m³/h) | 18000 | ||
Cooling water pump | Type | Centrifugal pump | |
Input power(W) | 1500 | ||
Outer engine liftmH20 | 26 | ||
Safety protection device High and low pressure protection, current overload protection , phase protection etc. | |||
Overall size | Length (mm) | 3600 |
|
Width (mm) | 800 |
| |
Height (mm) | 1650 |
| |
