Air floatation machine for waste water treatment equipment

1.YM series type vortex concave type flotation machine introduction:
YM series type vortex concave type flotation machine, is an introduction of the advanced technology of wastewater treatment equipment, reasonable design, convenient operation, economy running, it is produced by the aerator microbubble, directly to remove suspended solids from the wastewater. Micro vortex concave aerator will "bubbles" injected directly into the sewage in the dissolved air without the need for in advance, and then through the perforated impeller "micro bubbles" uniform distribution in wastewater, so the whole operation process does not happen jam phenomenon, more do not need to be dissolved air pressure, circulating pump and air compressor equipment. Untreated sewage into the dosing zone first, and then enters the aeration zone and micro bubbles full contact, ZWF vortex concave type flotation machine features: micro bubbles rising will be suspended solids float to the surface in the process of slag scraper run along the liquid surface will be suspended to tilt 45 degrees of inclined plate, and pushes it into the sludge discharge pipe groove, through the sludge discharge pipe groove into the sludge collection area. Sewage purification before discharge after passes through inclined plate at the bottom of the overflow groove, the overflow tank is used to control the water level of air floating machine, ensure the liquid tank into the sludge discharge pipe, open throat flow pipe from the aeration period stretching across the bottom of the air floatation tank.

2.YM type vortex concave air floating machine features

(1) no noise, no need to repair parts.

(2) don't need a circulation pump, all Yi Xun parts anywhere can be purchased.

(3) do not need air compressor, equipment performance is good simple installation as a whole.

(4) do not need to solution tank, save covers an area of 20% to 40%, saving running into 30% - 50%.

(5) ZWF type aerator for each power 1.1 KW, 1.1 KW.

Vortex concave Air flotation (CAF), Cavitation Air Floatation) system is the world's unique patented water treatment equipment, and the U.S. department of commerce export recommendation technology and the environmental protection agency. CAF is dedicated to remove the grease in the industrial and urban sewage, jelly and suspended solid (SS) and design of the system. The whole air floating system is made up of five parts

System advantage

1. Save investment Vortex concave floating no pressure vessel, circulating pump equipment, air compressor, thus less equipment investment. Equipment cover an area of an area small, less construction investment. Q = 200 m3 / h of vortex concave air flotation (CAF) equipment covers an area of only 36.15 m2.

2. The operation cost is low The system because of no pressure vessel, air compressor, circulating pump and so on equipment, saving power consumption. Q = 200 m3 / h of vortex concave air flotation (CAF) system energy consumption was only 5.435 KW, and dissolved air flotation (DAF) system energy consumption up to 65 KW. Vortex concave air flotation (CAF) system is very easy to operate, no complicated equipment, so the manual operation and maintenance workload, reduce the labor and maintenance costs.

3. The treatment effect is remarkable Oil, suspended solid (SS) removal rate over 80%. BOD and COD removal rate can reach more than 60%. And dissolved air flotation (DAF) system for BOD and COD removal rate can reach 35%. Can promote the oxidation of sulfide, reduce sulfur content in the wastewater.

4. Simple operation This system is very easy to operate, there are no complicated equipment; The whole system is made up of two mechanical parts only, not like a dissolved air flotation (DAF) system includes a pressure vessel, air compressor, circulating pump and many other necessary equipment.