Tea, juice,milk and all the hot filling drink machinery

Pet bottle and glass bottle

Screw capping and press capping cap

Capacity from 1000-25000 bottles per hour

Lubrication system

SUS 304 or 316 materials

PLC controller

Suitable for the different types bottle 200ml-2000ml

Feeding conveyor:

1 easily to change the bottle shape

2. Rise the speed

3. Connect the bottle feeding part

4. Could add the bottle stopping device

5. Air conveyor for the plastic bottle, screw conveyor for the glass bottle

Washing part

1. 1.       Inverter clamp to pick up the bottles by catch the bottle neck
2. 2.       SUS304 stainless steel
3. 3.       spraying nozzle could reach all the parts of the bottle ,save the washing water

The bottle will be feed into the machine through the conveyor to the first part is rinsing part, there are many support seats and the bottle grippers ,The grippers take the bottles from the inlet star wheel while they are still driven by the star wheel, thus guaranteeing a safe grip.
 The bottle is turned upside down and centered above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again.

Filling parts

1. No bottle no filling

2. Same filling level of all the bottles, adjustable filling level 

3.Filling precision ≤±2mm

4. Vacuum filling method

5. filling temperature:85-95°C

6. No dropping 

For the juice, milk and tea, we should adopt the hot filling valves, to protect the quality of the beverage,This series machine adopts block bottle-neck hanging work state design and filling valve rise-drop design. It satisfies 95 degree hereinafter hot filling technology demand. –

The star wheels drive the bottles always "by the body" through the rinsing, filling and capping steps. For the various types of bottle, it is easy to adjust the structure for the operator by our specialized design.

Filling valve should use the stainless steel as the material .

Capping parts

1.PCO ,plastic cap, metal cap, aluminum cap

2.no bottle no capping

3.two sensor to check, PLC control

4.no full no capping

5. Place & capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping

6. All 304stainless steel construction

7. Automatic stop when lack of bottle

8. Automatic caps arranging and feeding, lack of caps automatic feeding

Lamp checker

Clearly to see the filled bottle

Vacuum tank and pump

Because the liquid contains the foam , so not only the valve has the degas feature, we also need the fit the vacuum pump and tank, to suck all the foam from the liquid ,  and send to the vacuum tank through the vacuum pump

Electrical apparatus

PLC/ transducer/ touch screen: siemens

Contactor/ air switch/ stabilized voltage supply: Schneider

Photo electricity/ proximity switch: Atonics

Cylinder: Air tack