SANPU CE ROHS LP 35W 24V waterproof variable dc power supply
USD $1 - $15 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
Features:
1. LP 35W 24V waterproof variable dc power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7. High efficiency .
8. International AC input .
9. Built-in EMI fiter .
10.100% full load burn-in test .
LP Plastic waterproof LP35-W1V | ||||
MODEL | 12V35W | 15V35W | 24V35W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V |
RATED CURRENT | 2.9A | 2.3A | 1.45A | |
CURRENT RANGE | 0~2.9A | 0~2.3A | 0~1.45A | |
RATED POWER | 35W | 35W | 35W | |
RIPPLE$NOISE(max.)NOTE2 | 100mV | 100mV | 150mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | |
SETUP.RISE TIME | 200ms 100ms | |||
HOLD UP TIME(Typ.) | 30ms | |||
INPUT | VOLTAGE RANGE | 85-264VAC | ||
FREQUENCY RANGE | 47~63HZ | |||
POWER FACTOR(Typ.) | PF>0.6/220VAC | |||
EFFICIENCY(Typ.) | 85% | 85% | 88% | |
AC CURRENT(Typ.) | 0.85A/110V/0.38A/230V | |||
INRUSH CURRENT(Typ.) | COLD-START CURRENT30A/230VAC | |||
PROTECTION | Short circuit | Protection Type:recovers automatically after fault condition is removed | ||
Overlaod | 102%~107% hiccup mode,auto-recovery | |||
Over voltage | ||||
Over temperature | ≥105%°C cut off the output, auto-recovery | |||
ENVIRONMENT | WORKING TEMP. | -20°C~+60°C | ||
WORKING HUMIDITY | 20%~90%RH | |||
STORAGE TEMP.HUMIDITY | –40°C~85°C/10%~95%RH | |||
SAFETY&EMC | SAEFTY STANDARDS | CE ROHS IP67 | ||
WITHSAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; | |||
EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 | ||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation | |||
Introduction
Certificates
Packing
Logistics&Payment