SANPU CE ROHS waterproof 20W led driver shenzhen 220v 24v power supply
USD $1 - $10 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
SANPU CE ROHS waterproof 20W led driver shenzhen 220v 24v power supply
Feathers:
1. Universal AC input / Full range;
2. 100% full load burn-in test;
3. Built-in EMI fiter with tiny ripple;
4. High efficiency, high qulity, long life and high reliability;
5. Abnormality protection function : short circuit ,over load ,over voltage,over temp;
6. Convenient wiring;
7. The product consists of indoor type and outdoor type;
8. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
LP Plastic waterproof LP20-W1V | ||||
MODEL | 12V20W | 15V20W | 24V20W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V |
RATED CURRENT | 1.7A | 1.4A | 0.8A | |
CURRENT RANGE | 0~1.7A | 0~1.4A | 0~0.8A | |
RATED POWER | 20W | 20W | 20W | |
RIPPLE$NOISE(max.)NOTE2 | 100mV | 100mV | 150mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | |
SETUP.RISE TIME | 200ms 100ms | |||
HOLD UP TIME(Typ.) | 30ms | |||
INPUT | VOLTAGE RANGE | 85-264VAC | ||
FREQUENCY RANGE | 47~63HZ | |||
POWER FACTOR(Typ.) | PF>0.6/220VAC | |||
EFFICIENCY(Typ.) | 85% | 86% | 88% | |
AC CURRENT(Typ.) | 0.5A/110V/0.28A/230V | |||
INRUSH CURRENT(Typ.) | COLD-START CURRENT30A/230VAC | |||
PROTECTION | Short circuit | Protection Type:recovers automatically after fault condition is removed | ||
Overlaod | 115%~135% hiccup mode,auto-recovery | |||
Over voltage | ||||
Over temperature | ≥105%°C cut off the output, auto-recovery | |||
ENVIRONMENT | WORKING TEMP. | -20°C~+60°C | ||
WORKING HUMIDITY | 20%~90%RH | |||
STORAGE TEMP.HUMIDITY | –40°C~85°C/10%~95%RH | |||
SAFETY&EMC | SAEFTY STANDARDS | CE ROHS IP67 | ||
WITHSAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; | |||
EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 | ||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation | |||
Introduction
Applications
Certificates
Logistics&Payment