SANPU 2013 hot selling CE ROHS waterproof IP67 24vac power supplies, led driver tuv, led transformer 24v
USD $10 - $25 /Piece
Min.Order:1 Piece
Shenzhen Sanpu Intelligent Technology Co., Ltd.
SANPU 2013 hot selling CE ROHS waterproof IP67 24vac power supplies, led driver tuv, led transformer 24v
Feathers:
1. Universal AC input / Full range;
2. 100% full load burn-in test;
3. Built-in EMI fiter with tiny ripple;
4. High efficiency, high qulity, long life and high reliability;
5. Abnormality protection function : short circuit ,over load ,over voltage,over temp;
6. Convenient wiring;
7. The product consists of indoor type and outdoor type;
8. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
LP Plastics waterproof LP100-W1V | |||||
MODEL | 12V 100W | 15V 100W | 24V 100W | 48V100W | |
OUTPUT | DC VOLTAGE | 12V | 15V | 24V | 48V |
RATED CURRENT | 8.5A | 6.7A | 4.2A | 2.0A | |
CURRENT RANGE | 0~8.5A | 0~6.7A | 0~4.2A | 0~2.0A | |
RATED POWER | 100W | 100W | 100W | 100W | |
RIPPLE& NOISE (MAX.)NOTE2 | 100mV | 100mV | 150mV | 150mV | |
VOLTAGE TOLERANCENOTE3 | ±1% | ±1% | ±1% | ±1% | |
SETUP , RISE TIME | 200ms/220VAC 100ms/220VAC | ||||
HOLD UP TIME(Typ.) | 30ms/VAC | ||||
INPUT | VOLTAGE RANGE | 85~264VAC | |||
FREQUENCY RANGE | 47~63Hz | ||||
POWER FACTOR(Typ.) | PF>0.6/220VAC | ||||
EFFICIENCY(Typ.) | 85% | 85% | 87% | 87% | |
AC CURRENT(Typ.) | 1.8a/110V,1A/230V | ||||
INRUSH CURRENT(Typ.) | cold start 40A/230V | ||||
short circiut | protection type: recovers automatically after fault condition is removed | ||||
PROTECTION | Over load | 115~135% hiccup mode, auto-recovery | |||
over temp | ≥85%°C cut off the output, auto-recovery | ||||
ENVIRONMENT | WORKING TEMP | -20°C~+60°C(no frost) | |||
WORKING HUMIDITY | 20%~90%RH | ||||
STORAGE TEMP , HUMIDITY | –40°C~85°C/10%~95%RH | ||||
SAFETY &EMC | SAFETY STANDARDS | CE ROHS IP67 | |||
WITHSTAND VOLTAGE | I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min | ||||
EMC Test Standards | EN55015:2006; EN61547:1995+A1:2000;EN61000-3-2:2006 | ||||
EN61000-3-3:1995+A2:2005;EN61347-3-13:2006 | |||||
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||
Introduction
Applications
Certificates
Logistics&Payment