Name: ISO CE ETCR6000 AC/DC Clamp Leaker electrical instrument
Brand: ETCR
Availability: InStock

Product Details

ETCR6000 AC/DC Clamp Leaker

Product information

Product Features

1.Able to measure DC leakage current, AC leakage current

2.Small clamp, suit for densely place

3.Current range: DC/AC 0mA~60A

4.Current resolution: 1mA

5.Size of clamp:Φ7mm

6.With RS232 interface

7.Data storage: 99 sets

ETCR6000 AC/DC Clamp Leaker is specially designed for measurement of AC/DC current; by adopting up-to-date CT technology and digital integration technology. The small clamp is suitable for line densely places (electric power measurement system, the high speed rail system, car circuit overhaul, and so on), non-contact measurement, to ensure safe operation. It is a product with relatively small size, high accuracy and perfect function compared with similar leakers in the world. The leaker could be widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. it is an essential tool for electrician safety testing.

ETCR6000 AC/DC Clamp Leaker also named: DC Leakage Current Clamp Meter, Car DC Leakage Current Clamp Meter, AC/DC Clamp Leakage Current Tester. It has those functions as data holding and data storage. It obtains one RS232 interface, communication cable and software, through which historical data inquiry is available, for data reading, exporting and printing.

Model Difference

Model	Range	Resolution	Clamp size
ETCR6000	AC/DC 0mA~60.0A	1mA	φ7mm
ETCR6100	AC/DC 0.0A~1000A	0.1A	30mm×35mm
ETCR6300	AC 0.000mA~60.00A	1uA	25mm×30mm
ETCR6500	AC 0.00mA~300.0A	0.01mA	35mm×40mm
ETCR6600	AC 0mA~600A	1mA	35mm×40mm
ETCR6800	AC 0.00mA~1200A	0.01mA	φ68mm
ETCR6800D	AC 0.0A~1500A ,DC 0.0A~2000A	0.1A	φ68mm

Technical Specifications

Function	Measurement of AC/DC current, leakage current
Power Supply	Zn-Mn dry battery,6F22,9V, continuous use for 100h
Test Mode	Clip-on CT, noncontact measurement
Clamp Size	φ7mm
Measurement Range	0mA~60.0A AC/DC
Resolution	1mA AC/DC
Accuracy	±2%rdg±5dgt (23℃±5℃, below 75%rh)
Display Mode	Four digits LCD display
Dimension	LWH: 168mm×65mm×34mm
LCD Dimension	35mm×21.5mm; display domain: 32mm×15mm
Sampling Rate	2 times/s
Frequency	AC: 45Hz-400Hz
Polarity Indication	DC current auto identified and display“—”
Test Position	Tested wire in the jaw center
Range Shift	Automatically
Line Voltage	AC600V
RS232 Interface	Data stored in the memory of the meter via RS232 upload to PC
Com-Configure	Baud rate:9600, data bit:8, stop bit:1, check bit: NONE
Data Memory	99units, FULL blinks when the memory is full
Reading Hold	DH indicating the reading is hold
Out of Range	OL indicating the current is out of range
Auto Power-off	5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage	Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
Weight	180g(including the battery)
Working Current	10mA
Humiture	-10℃-50℃,below 80%rh
Limit Temperature Error	-10℃-0℃ and 40℃-50℃, within 2%rdg
Humiture Storage	-10℃-60℃,below 70%rh
Insulating Strength	AC 3700V/rms. (between the alloy of the clamp and the housing)
Applicable safety rules	IEC1010-1, IEC1010-2-032, pollution:2, CAT Ⅲ(600V)
Accessories	Meter:1pc; Toolkit:1pc; RS232 communication line;Disk:1pc; Case:1pc

Packing

Packing Size: (L ×W ×H): 220×110 ×75(mm)

Weight: 0.3Kg