Product Details

Product Show

Product Description

Introduction

Double roll sand maker is also called double roll crusher. 2PG series of Double sand maker is used for medium and fine crushing of all kinds of medium hard ore and rock in mineral separation, chemical industry, cement, building materials industrial department.

It is used as sand maker in sand making industry and for super fine crushing in particular industry.It is used for medium crushing.

Double roll sand maker consist of engine body, roller safety spring, etc. Transmission is driven by motor across belt that the rollers are rotating in two directions. Rollers space cn adjust within the prescribed limit to control the discharge size.

	Specifications
Model	2PG400*250	2PG610*400	2PG750*500	2PG900*900
Roller diameter(mm)	400	610	750	900
Roller Length(mm)	250	400	500	900
Max feed size(mm)	25	75	100	100
Discharge size(mm)	0.5-8	0.5-20	0.5-20	0.5-20
Capacity(t/h)	2-10	4-20	10-30	15-50
Roller number	2	2	2	2
Speed(r/min)	180	60	50	37
Power(kw)	11	30	44	60
Dimension(LWH) (mm)	1430980795	36001470888	253032651316	395523601987
Weight(t)	1.3	3.9	8.95	22.935
The capacity refers to limestone, professing capacity may vary with different materials and feeding sizes.

Operating principle

There are wedge or gasket of double sand maker installed between the two rollers and adjustable bolt installed on the top of the wedge device. When the adjustable bolt pulled up the wedge, the wedge will make the moved roller getting off the fixed roller. The gap between two rollers become bigger, so does the discharge size. On the contrary, the gap become smaller, so does the discharge size. Gasket device can adjust the discharge size trhough increasing and decreasing the gasket numbers or thick and thin. When increasing the gasket, the gap between two rollers become bigger, conversely, the gap and discharge size become smaller.

Features

1.Compact and flat design resulting in a low/flat overall height of the crushing plant.
2.Easy replacement of crushing segments and comb plates.
3.Insensitivity to smeary, ductile, wet and sticky feed materials.
4.Inclination of side walls is adjustable to improve material feed and intake of larger feed lumps.

5.In most cases pre-screening is not necessary, as the fines contained in the final product can smoothly pass through the crushing tools.
6.Low dust burden.
7.Low specific wear rate due to slow circumferential speeds.
8.Minimum quantities of fines in the final product due to low circumferential speed and special.

Company Information

Our Services

Pre-sale:Enthusiastic
We offer you the early planing of the project, the best process flow design, choose the best appropriate equipment model to design products according to your special needs.

Sale: Integrity
All productds have to pass strict inspection with the drawings and process flow according to the contract before they go out. We assigned the technicians to the producing spot to provide installation guide, testing and training.

After-sale:Considerate
To establish good business relationship, we adopt periodical visit to the users. We could give you the definite reply during 24 hours when the users meet some problems in the producing process.

FAQ

Q: Payment?
A: 30% by TT as deposit on signing the contract, 70% by as final payment of balance after the client's satisfactory inspection of the equipment prior to the goods leaving the factory.

Q: What about Warranty? And what will we do if the machine is broken down?
A: The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.

Q: What should we need to do for if we want to get a best quotation?
A: Hi, if you want us recommend a suitable type for you, please let us know the details as follows:
   1) The capacity (tons per hour ) do you need?
   2) The size of the raw materials and the size of the finished products?
   3) What's your main raw materials?(soft or hard materials? water content?)

Q: What could you help me to do for the business?
A: Many thanks for your trust, we can provide you with proposal chart for complete production lines, spot inspection and operator traning according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, loader, trucks, excavators and so on for rotary washer for sand washing.

Q: Delivery time?
A: Standard delivery time for stationary crusher plant is 30 working days from receipt of deposit, the mobile crusher plant is 45 working days.