Product Overview
•The ZXV10 W615 V3 is an outdoor dual-band WLAN access device and can operate at 2.4GHz and 5GHz bands at the same (2.4G for wireless coverage and 5G for wireless coverage or bridge). This IEEE 802.11n high-performance AP supports MIMO 2x2, dual spatial streams and 300Mbps rate per band. It can be mounted on the wall or on a pole. Based on ZTE’s unified CSP software platform, it can easily switch between the standalone and coordinated AP modes, providing you with a reliable and manageable carrier-class WLAN.

Hardware Structure
•The ZXV10 W615 V3 hardware uses the dedicated high-performance MIPS processor of the WLAN to support the 10/100/1000M wired Ethernet interface, in line with IEEE802.11n 300Mbps standard. It can flexibly select its operating band to avoid wireless interference. With 500 mW power, it provides more stable wireless signals and more coverage areas.
•The ZXV10 W615 V3 uses the metal shell, featuring solid design, good natural heat dissipation and convenient installation, meeting the IP66 protection class requirement for outdoor scenarios.

Product Features

RF features
Protocol
IEEE 802.11a/b/g/n
Data rate
11a mode: 54/48/36/24/18/12/9 / 6Mbps adaptive
11b mode: 11/5.5/2/1 Mbps adaptive
11g mode: 54/48/36/24/18/12/9 / 6Mbps adaptive
11n mode: MCS15~MCS0 adaptive, supporting HT40/HT20, Max. PHY rate of 300 Mbps
Antenna type
External 2x2 MIMO
Frequency band
2.4-2.484 GHz
5.15-5.85 GHz
Carrier bandwidth
20MHz/40MHz
Transmit power
2.4GHz: 24 dBm
5.8GHz: 27 dBm
Number of SSIDs
2x16

Physical features
RF antenna interface
4 x N antenna types
Network interface
1 RJ45 for 10/100/1000M Ethernet (automatic MDI/MDI-X)
Other interface
1 pressure-operated valve
Environment requirement
Protection class: IP66
Operating temperature: -40C to 60C
Operating humidity: 0% ~ 100%
Power consumption
18.4 W (typical application)
Power supply
IEEE802.at standard PoE
Dimensions
210mm (L) x 210mm (W) x 69mm (H)
Weight
3 kg

Software features
Basic function
•Supporting integrated standalone/coordinated software version; supporting software switching between coordinated and standalone modes
• Supporting multi-SSID function
• Supporting IPv4/IPv6
• Supporting IEEE802.1q VLAN functions
• Supporting coordinated AP broadcast, DHCP and DNS functions; supporting static AC discovery
• Supporting PPPoE dual-up
• Supporting automatic frequency setting
• Supporting CAPWAP tunnel protocol between the AP and the AC
Security
•Supporting user isolation

• Supporting 802.1X extensible authentication mode
• Supporting 64-bit/128-bit WEP encryption function; WPA, WPA2, WPA-PSK, WPA2-PSK
• Supporting MAC address-based access control and basic security requirements of WLAN interfaces
QoS
•Supporting IEEE 802.11e and WMM as well as ITU-T Y.1291-defined QoS
• Supporting user- or traffic-based load balancing
Network management
•Supporting local and remote management; supporting access logs and security logs
• Supporting ZTE’s unified network management platform
• WEB page configuration
• SNMP Agent (standard MIB and manufacturer-defined MIB, alarm TRAP function)
• Supporting remote version upgrade
• Supporting remote upgrade of configuration files

Highlights
Dual-band access to improve user experience
The W615 V3 can operate at 2.4GHz and 5GHz bands at the same time. It supports four protocols: 802.11a, 802.11b, 802.11g and 802.11n.
High-performance wireless access
The W615 V3 conforms to 802.11n and supports MIMO 2*2. It can provide wireless access bandwidth of up to 300Mbps, providing users with high throughput and good service experience.
Wired Ethernet interface
The UL interface uses Gigabit Ethernet interface access, completely supporting interface bandwidth requirements for 11n rates.
Strong network security
The W615 V3 provides abundant network security functions to protect against Xdos attacks, automatic virus isolation and Ping link failure diagnosis functions. It supports various encryption and authentication modes such as WEP, WPA, WPA2, 802.1X and WAPI, effectively protecting network security.
Excellent performance
By using a high-performance processor and large-capacity RAM/FLASH, the W615 V3 has high throughput and strong load capabilities. It supports automatic power adjustment, automatic frequency adjustment and load balancing to make large-scale wireless networking more flexible.
Environment protection, energy conservation
By using low-consumption components and industry-leading integrated chip design solutions, the W615 V3 can reduce PoE switch load, improve heat dissipation perofrmance, and therefore greatly improve the running reliability.
Excellent RF performance
The advanced design solution and extensive RF design experience ensure that the W615 V3 has better RF performance than the homogeneous products.
Management and maintenance features
ZTE APs and WLAN unified management system NetNumen U31 platform support SNMP V2 V3 and have the most extensive MIB management parameters. The number of the AP-side MIB management parameters exceeds 450, meeting WLAN operation & maintenance & management requirements.
Supporting integrated coordinated/standalone architecture
The software design supports the integrated coordinated/standalone platform. Through software settings, the W615 V3 can switch between the coordinated and standalone AP modes.

Typical Application Scenarios
•The W615 V3 is an outdoor wirelesss access point. It can be used to provide Wi-Fi signal coverage in outdoor environments for wireless offices, wireless libraries, wireless storekeeping and Internet.