1. System introduction: 

Contains more than ten kinds of typical sensors and processing circuit. Standard thermometer table configuration, the experiment more perfect. Compact structure, small and light, the experiment accuracy is high, the power supply condition monitoring, Over current and overvoltage protection, safe and reliable operation. To adopt the new cables; Elastic contact, solid and reliable, and should not be pulled apart or cause drag mark; Join point locking type connectors, reliable contact, convenient to do experiment..

2.Sensor technical index

2.1 Resistance strain sensor: consists of BHF foil type strain gauge , 6 pieces of work pieces, 2 pieces compensator

2.2 Thermoelectric (thermocouple) sensor: the two copper - constantan thermocouple concatenated to the cold end temperature and that is ambient temperature.

2.3 Inductive sensor (differential transformer) : by one primary and two secondary coil winding and become transparent hollow coil, the core of soft magnetic ferrite, measuring range 0 ~ 12 mm

2.4Eddy current sensor: multiple strands of enameled wire winding flat coil and a variety of pieces of metal eddy current being measured, the linear range ≤3mm

2.5Hall sensor: Japan's JVC HZ type linear semiconductor production hall and placed in a gradient magnetic field compose of ring magnet steel, hall signal linear range > 3 mm.

2.6 Magnetoelectric sensor: compose of the coil and moving iron (permanent magnet steel), the sensitivity is 0.4 V/m/s

2.7Piezoelectric acceleration sensor: compose of bimorph PZT - 5 and a copper gage block. F≥10 KHZ, Q charge > 20 PC/g

2.8Capacitive sensors: two stator and a set of moving pieces constitute the differential variable area type capacitance, linear range ≥±3mm

2.9PN junction temperature sensor: using good linear temperature voltage characteristic of semiconductor PN junction constitutes  the temperature sensor. Sensitivity: -2mV/°C

2.10Thermistor: : semi-conductor thermistor NTC (negative temperature coefficient, when in 25°Cstate, it is 10 KΩ)

2.11 Piezoresistive pressure sensor: range: 35 KPa, power supply: ≤4V MPS piezoresistive pressure sensor.

2.12Optical fiber sensor, optical fiber, transmitting and receiving circuits constitute light type sensors, linear range :10 mm. Infrared transmitting and receiving, 2 x 60 strands Y shape, semicircle distribution

2.13 Gas sensor: Tp - 3: alcohol sensitivity, measurement range: 50 ~ 2000 PPM.

2.14Humidity-sensitive sensors: high polymer thin film resistor type: RH: several M Ω – several K Ω, response time: moisture absorption, moisture is less than 10 seconds. Humidity factor: 0.5 RH % / °C, measuring range: 10% RH - 95% RH, working temperature: 0 °C - 50 °C.

2.15Pyroelectric infrared sensors: remote infrared type

2.16 Photoelectric sensor: compose of the light coupling darlington output and shaping circuit. N=2400r/min

2.17Silicon cells: Si solar type

2.18 Photosensitive resistance: CDS material, several Ω – several K Ω

2.19 photosensitive diode

2.20 phototriode

XINGKE Products Specifications  

The First-Class Vocational Teaching Equipment Supplier/Manufacturer in People’s Republic of China. 
1. Good quality 
2.Reasonable price 
3.OEM Service

XINGKE Mainly Products Range:

1. Electrical Automation Training Equipment

2. Electronic/Electrical Technology Training Device.

3. Air-Conditioning and Refrigeration Training Sets

4. Power-Electronics Teaching Appliance

5. Mechanical and Electrical Integration Educational Apparatus

6. Sensor and Robot etc. Training Model

7. Car Maintenance Training Equipment/ Auto Electrical/Teaching Demonstration Board

8. Iron-making/Steel Rolling/Nonferrous Metal Smeltery Virtual Production Line Simulation Training System and Construction Machinery Virtual Simulator.

9. Supply OEM Services.

1. The advantage of our Product:

1)We have manufactured for over 10 years.

We are the leading manufacturer of Educational Equipment Industry in China. We have a large group of material suppliers. They are stable and very cooperated due to our big factory strength.

2)The stable output was upon the stable quality. We will schedule the annual orders plan for you upon the stable annual output.

3)Our tech and service team was very powerful and professional.

We always can meet your requirements upon our tech and service. The large group of tech and service team will meet you around 24 hours. And we will develop the new products upon your potential orders.

4)We have our own brand “XINGKE”

5)We supply quality equipment at economical prices.

2. Our Factory:

XINGKE Industry Park located in the Middle Section of IndustryⅡRoad, Zhangqiu, Jinan, Shandong, China. Our factory covered with 1700 square meter.

3. Packaging And Delivery Details:

Packaging Detail: 1. Packaging for training kit: plastic package + carton + plywood pallets

2. Packaging for training equipment: plastic package + plywood pallet

3. As the clients' requirement, print your logo, etc.

Delivery Detail: 20 to 40 days after Received advanced payment (depend on the total amount)

4. After-Service And Training for Foreign User 

1. For our exported equipments, the Warranty is one year, within one year, if there is any problem for spare parts(except damage by man-made) We can supply and replacement free of charge. And if exceed one year, we also supply the service, and process to instruct maintain, and instead the parts charge a certain fee.

2. We dispatch our professional and experienced engineer to install equipments and make training for the end users.

5. Reputation:

Our products earn a good reputation among our customers . We welcome customers , business associations and friends from all of the world to contact with us and seek cooperation for mutual benefits.

NOTE: All items are directly from factory, We would allow you a quantity discount, so please contact with me when you plan an order, we will answer back ASAP.