Full HD Video Conference Camera System, buy SMTSEC SVC-C368-18-USB supports VISCA/RS232/RS485 PTZ Control 18x optical zoom super Video performance video conference camera on China Suppliers Mobile

Product Details

SMTSEC SVC-C368-18-USB supports VISCA/RS232/RS485 PTZ Control 18x optical zoom super Video performance video conference camera

Product Description

SVC-C368-18-USB equipped with FCB-EX48EP Which is deliver 18x optical zoom super Video performance with 1/4 Exview CCD, it supports VISCA/RS232/RS485 PTZ Control. There are S-Video, AV video output and USB connect for optional, built in 360 degree continuously Pan movement, 90 degree Tilt and features with REV for up-side down installation. Which is Ideally suited for Web conferencing system, remote education, lecturing and Training room application.

Features:
S-Video/AV output
Private Tooling design Color Video PTZ Camera
Fast and smooth video handling
Power ON-OFF switch
Work & Standby LED indicator
Speed Match
Auto/Manual focus/brightness/WB
RS-232C/VISCA Protocol
Lens/Dome OSD
Boundary scanning
Standby & wakeup status

Performance:
1/4-type Exview HAD CCD
550TVL 18x Optical, 12x digital zoom, f=4.1 mm to 73.8 mm, F1.4 to F3.0
12x (216x with optical zoom
48 degree (wide) to 2.8 degree (tele)
1.0 Lux/F1.4
USB Interface
Pan 360 degree continuously
Tilt +90 degree, -45degree
64 preset positions
4 cruise lines
DC 12V, 2A

Dimension:
L 250mm x W 140mm x H154mm
N. Weight: 2.6kgs
G. Weight: 4.8kgs

Installation:
Desktop
Ceiling mount
Standard Tripod accessory

Model Number		SVC-C368-18-USB
Image Sensor	Sensor	SONY FCB-EX48EP 1/4-type EXview HAD CCD
	Signal System	PAL/NTSC
	Illumination	1.0Lux/F1.4
	White Balance	Auto/Manual
	Gain Control	Auto
	Back-light	On /Off
	compensation	On /Off
	E-Shutter	1 - 1/100,000s
	Horizontal	550 TVL
	Resolution	550 TVL
	S/N Ratio	>50db
Lens	Focus	f=4.1-73.8 F1.4 -3.0
	Iris	Auto/Manual
	Zoom	18x Optical X 12x Digital Zoom
Video Output		USB Output (Optional)
Control Decoder		Built-in decoder
Communication		EIA/RS422, EIA/RS232(Bidirectional)
Interface		EIA/RS422, EIA/RS232(Bidirectional)
PTZ Control Protocol		VISCA, PELCO-P, PELCO-D(optional)
Baud Rate		4800/9600bps
Patrol Lines		4 Patrol Lines
Preset Position		64 Preset Position
Power-off Protection		Saved scanning or patrol line settings Automatically Before power off
Speed Matching		Slow down camera Pan/Tilt movement speed while camera zooming in
OSD Menu		To change parameters of camera or camera module from OSD Menu
Image Auto Flip		Image Auto Flip
Pan Speed		1-280 degree per second
Tilt Speed		1-100 degree per second
Pan Rotation Angle		360 degree continuously
Tilt Rotation Angle		240 degree
Auto Pan Scan		Support auto pan scanning
Boundary Scan		0-359 degree(programmable)
Remoter Control		IR wireless remote controller P/T/Z
Power Supply		DC12V±10%, 1.2A
Working Temperature		0-50℃
Environment Humidity		0-95%RH
Size(LxWxH)		124X120X145mm
Weight		1300g

SMTSEC Video conference camera FAQ
Symptom	Cause	Remedy
The power of the camera is not turned on.	The supplied AC power adaptor is not connected to the DC IN 12V jack firmly, or the AC power cord is not inserted firmly into the AC power adaptor or the AC outlet.	Insert the power cord firmly as far as it will go.
The power of the camera is not turned on.	Not Turn On the Power switch as “ON”.	Turn On the Power switch as “ON”.
Insufficient frame rate detected	Cannot recognize USB 3.0 connection, but the USB 2.0 speed.	Make sure you connected USB 3.0 Cable, USB 3.0 connect, and firmly connect to USB 3.0 interface.
Pan,tilt or zoom cannot be operated.	Any menu is displayed on the monitor screen.	Press the “Dome OSD” OR “Lens OSD” on the Camera remote control Unit to turn off the menu from the monitor screen.
Pan,tilt or zoom cannot be operated.	The panning or tilting range is limited	Pan/Tilt movement range is ± 45 degree.
The Remote Commander does not work.	The Camera Select button you pressed on the Remote Commander does not match the number set with the IR SELECT switch on the camera.	Press the Camera Select button corresponding to the IR SELECT SWITCH setting on the Camera.
The Remote Commander does not work.	Used out of battery	Change new battery (AA x 2)
The VISCA control is not available with a computer connected to the camera.	The computer is not correctly connected to the camera.	Make sure the connection between the computer and camera is made correctly.
	The computer is not correctly connected to the camera.	Check that the VISCA control setting (RS-232C or RS-422) and the baud rate setting (9600 bps or 38,400 bps) are properly made with the BOTTOM switch on the bottom of camera and the COM Port which configured in your computer.
The camera cannot be operated at all.		Pull out the plug of the power cord from the AC outlet, then reinsert it into the AC outlet after a while.

Packaging & Shipping

China Post (10-30 days)
EMS (5-15 working days)
DHL (3-5 working days)
UPS (3-5 working days)

•The most reliable, affordable way of shipping method deponds on your address.
•Online tracking number will be emailed to buyer through email.
•We dont take any responsibility for any custom delay.

Our Services

•All products have been checked and packaged in good condition before dispatch.

•All products have 1 year warranty.