Full HD Video Conference Camera System, buy SMTSEC SVC-HD652M 1/2.7" HD color CMOS USB Interface Network Conference System on China Suppliers Mobile

Product Details

SMTSEC SVC-HD652M 1/2.7" HD color CMOS USB Interface Network Conference System

Product Description

Model		SVC-HD652M
Image	Sensor	1/2.7” HD color CMOS
SenSor	Minimum Scene lllumination	0.5Lux at F2.0
	White Balance	AUTO
Lens	Lens	4 mm
	Iris	AUTO
	Hov	72.5 degree
Video Output		USB Interface
Video format		1080p@30, 720p@30, MJPEG Compression
Control Decoder		EIA/RS-485, USB
Communication		EIA/RS-232(Bidirectional)
PTZ Control Protocol		VISCA, PELCO-D
Baud Rate		9600/38400bps
Patrol tours		1
Preset		64
Save status after Power off		Support
Speed Matching Function		Support
Image Auto Flip		Support
Pan Speed		0-280 degrees/s
Tilt Speed		0-100 degrees/s
Pan Rotation Angle		360 degrees
Tilt Rotation Angle		+ 90 degrees, - 45 degree
Auto Pan Scan		Support
Boundary Scan		0-359 degree(Programmable)
Remoter Control		IR Wireless remote control P/T/Z
Power		DC12V ±10% 1.2A
Operation Temperature		0℃~50℃
Environmental humidity		0-95%RH(non-condensaion)
Length X width X high		124x120x145mm/220x175x220mm(NET/PACKAGE)
Weight		640g/1100g(NET/PACKAGE)

SMTSEC Video conference camera FAQ
Symptom	Cause	Remedy
The power of the camera is not turned on.	The supplied AC power adaptor is not connected to the DC IN 12V jack firmly, or the AC power cord is not inserted firmly into the AC power adaptor or the AC outlet.	Insert the power cord firmly as far as it will go.
	Not Turn On the Power switch as “ON”.	Turn On the Power switch as “ON”.
Insufficient frame rate detected	Cannot recognize USB 3.0 connection, but the USB 2.0 speed.	Make sure you connected USB 3.0 Cable, USB 3.0 connect, and firmly connect to USB 3.0 interface.
Pan,tilt or zoom cannot be operated.	Any menu is displayed on the monitor screen.	Press the “Dome OSD” OR “Lens OSD” on the Camera remote control Unit to turn off the menu from the monitor screen.
	The panning or tilting range is limited	Pan/Tilt movement range is ± 45 degree.
The Remote Commander does not work.	The Camera Select button you pressed on the Remote Commander does not match the number set with the IR SELECT switch on the camera.	Press the Camera Select button corresponding to the IR SELECT SWITCH setting on the Camera.
	Used out of battery	Change new battery (AA x 2)
The VISCA control is not available with a computer connected to the camera.	The computer is not correctly connected to the camera.	Make sure the connection between the computer and camera is made correctly.
		Check that the VISCA control setting (RS-232C or RS-422) and the baud rate setting (9600 bps or 38,400 bps) are properly made with the BOTTOM switch on the bottom of camera and the COM Port which configured in your computer.
The camera cannot be operated at all.		Pull out the plug of the power cord from the AC outlet, then reinsert it into the AC outlet after a while.

Packaging & Shipping

China Post (10-30 days)
EMS (5-15 working days)
DHL (3-5 working days)
UPS (3-5 working days)

•The most reliable, affordable way of shipping method deponds on your address.
•Online tracking number will be emailed to buyer through email.
•We dont take any responsibility for any custom delay.

Our Services

•All products have been checked and packaged in good condition before dispatch.

•All products have 1 year warranty.