Specifications

the space fixture uses the imported micro-cylinder as the driving force to avoid blocks being damaged

   Gypsum block production line

  

   The drying kiln of gypsum block is divided into horizontal wind and vertical wind, and it can use different heat source, such as coal, natural gas, diesel, steam or others. We can provide appropriate design and equipment supply in accordance with customer different requirements.
   The picture is just the kiln trolley of drying kiln for the annual quantity 500,000 square meters gypsum block production line we contract to build. We will not show our drying kiln because of technology secrets, so if you want to build a drying kiln, please contact with us directly.

   Our gypsum block production line is a new type equipment developed by combining domestic practical situation based on German machine set. The mould cavities used in gypsum block production line are made by stainless steel and chrome plating and treated by polishing process, which has the surface finish quality of 0.1μm and the size accuracy of 0.05mm; the mixer used in gypsum block production is also made by stainless steel, with self-cleaning device, never stick materials; the space fixture uses the imported micro-cylinder as the driving force to avoid blocks being damaged; the drying kiln uses horizontal wind system which ensures a reasonable moisture migration to avoid surface over-burning; the finished products are packed by fully automatic packaging machine with a patented technology, which can pack many specifications, such as 2 × 2, 3 × 3 and etc.
   At present, our company can design the gypsum block production line with annual quantity of 100,000 square meters, 150,000 square meters, 200,000 square meters, 300,000 square meters, 500,000 square meters and so on, and its specification can be 666 × 500 × 80 (hollow and solid), 666 × 500 × 100 (hollow and solid), 666 × 500 × 120 (hollow and solid), 666 × 500 × 150 (hollow and solid), 666 × 500 × 180 (solid) and etc., which are all international standard specifications, and we can make mould cavities with different specifications in accordance with user requirements, and the mould cavities of different specifications can be replaced in the same machine set.