Product Details

Stainless Steel Mesh Belt Dryer For Food :

Introduction of mesh belt dryer :

mesh belt dryer is a kind of drying equipment that through electrical heating, steam heating and hot wind heating in taking advantage of steel mesh as transmission band to carry materials for continuous drying. Directly deliver the suppressed finished product ball to table conveyor through conveyor, evenly distribute the finished product ball in dryer through scraper blade located in the upper point of table conveyor in order to increase air permeability of ball and achieve drying.

Working principle of mesh belt dryer :

The heat radiation and heat convection heat the air in the mesh belt dryer drying chamber after the air being exchanged by the heat exchanger. The hot air is diffused in the whole drying chamber and carry out sufficient heat exchange with materials under the function of fan. The vapor is removed from the drying chamber under the humidity removing fan.

Advantage of mesh belt dryer :

1.Mesh Belt Dryer is widely applied in chemical, foodstuff, pharmacy, construction material, and electronic industry.

2.particularly it is adapt to dry the raw materials which have good air permeability and shaped in sheet, strip or granule.

3.For ointment stuff, the wisest way to dry it is: shaped that stuff first, and then drying it.

Features of mesh belt dryer:

1 Low invest, fast drying speed, high evaporation efficiency.

2 High rate and capacity, good quality output.

3 Adjustable air flow, feeding temperature, materials stop time.

4 Hot exhaust air can be recycled

5 Special hot wind separate system, which enables the hot air more evenly.

Mesh Belt Dryer Technical Parameters:

specifications	BD6	BD8	BD10	BD12	BD16	BD20	BD24	BD30
Net belt width(mm)	600	800	1000	1200	1600	2000	2400	3000
Dry length(m)	6-12	6-12	6-16	8-16	8-22	10-26	12-30	12-40
Feed length(m)	1	1	1	1	1	1.5	1.5	2
Drive length(m)	1	1	1	1	1	1.5	1.5	2
Dry area(m2)	3.6-36	4.8-48	6-80	7.2-96	12.8-105.6	20-260	28.8-360	36-600
layer	1-5
Layer spacing(mm)	400-600
Carrying capacity	90-200 Kg/m2
Using temperature	Carbon steel≤400 C°,Stainless steel≤600 C°
Evaporation intensity	5-20kg water/m2.h
Heat source	Hot air, electricity, steam
speed	0.06-1m/min
Transmission power(Kw)	1.1-2.2	1.1-2.2	1.1-2.2	1.1-3	1.5-3	1.5-4	3-7.5	5-11
supporting equipment	Conveying equipment, hot blast stove, dust removal equipment, induced draft fan, etc

Contact:
Ms Sara Pang
Mobile phone : (whatsapp number): 0086137 8347 1727
Skype: sarapang6
Wechat: sarapang6