Flotation Cell Price For Gold Ore/Copper Ore/Talc Ore
USD $1,000 - $200,000 /Set
Min.Order:1 Set
Zhengzhou Hengxing Heavy Equipment Co., Ltd.
The Flotation machine (Flotation cell) can be used for separating non-ferrous metals, ferrous metals, noble metals, non-metallic ores, and chemicals. The flotation machine can be used in roughing, scavenging, selection or reverse flotation. In the flotation process, after being mixed with additives, some qualified minerals float to the surface of the slurry and are scraped out while other minerals remain and are thus separated. We also provide flotation cells.
Structure Of Flotation Cells
The structure of flotation cells: this machine is mainly composed of pulp chute, mixing device, air charging system, mineralized bubble discharging device and electro motor.
(1) Pulp chute: It has pulp feeding mouth and the gate device used for adjusting the liquid level and it is mainly composed of mainly composed by the chute body which is melt by the steel board and gate melt by the steel board and steel rod.
(2) Mixing device: It is mainly used for mixing the pulp in order to prevent the mineral sand to deposit on the chute, and it is mainly composed by the belt wheel, impeller, vertical shaft and the impeller is made of the anti-abrasion rubber.
(3) Air charging system: It is mainly composed by the inlet air pipe. When the impeller rotates, there will produce negative pressure inside the impeller chamber in order to absorb air through the hollow pump line and disperse the pulp in order to form a bubble group. This kind of pulp with large quantity of bubbles will be thrown to the stator fast by the rotary force of the impeller and further mineralize the bubbles in the pulp, and the rotary movement that is meant to eliminate the pulp flow in the flotation cell will cause large quantity of microvesicle and provide necessary condition for the flotation process.
(4) Mineralized foam discharging device: This device is mainly used for scarping the foam floating on the cell and it is mainly composed by the reducer driven by the electric motor and scrapper driven by the reducer.
1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
2) The impeller of the flotation cell begins to rotate; negative pressure is formed, which makes the air and pulp at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicament are then mixed in the mixing zone.
3) As a result of the centrifugal force, the blended pulps are led to the mineralization area. The air is in full contact with the coal particle and forms mineralized bubbles which are then equally distributed to groove wall and removed upward to the separation region. These bubbles then gather as a foam layer and are discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.