Product Details

1.2mm/1.4mm/1.6mm Flux Cored Welding Wire manufactory E81T1-Ni1 Mig solid wire

Low Alloy Flux Cored Welding Wire E81T1-Ni1:
Increased Deposition Rate
Improved Weld Integrity.
Good Operator Appeal.

Description:

Low alloy flux cored welding wire E81T1-Ni1:

Exceptional mechanical properties.
Superior low temperature notch toughness and CTOD values.
Outstanding weldability, low spatter and good bead appearance.
Suitable for replacing E8018-C3 stick electrode and for welding A588 weathering steel where colour match is required.
Manufactured under a quality system certified to ISO 9001 requirements.
Diffusible hydrogen conforms to relevant approval agency designations.
The manufacture and quality conforms to Japanese Industrial Standard (JIS).

Packing:

All spools of wire are level layer wound on plastic spool.
The spools are then vacuum-packed with silica gel in moisture proof, foil-poly bags.
The spools of wire are boxed and securely stacked on wooden pallets with shrink-wrap plastic.

TYPICAL APPLICATION:

CONFORMANCE

JIS Z 3313: YFL-C502R
AWS A5.29 / ASME SFA-5.29:
E81T-1-Ni1JC

SHIELDING GAS

100%CO2 shielding gas
Flowrate: 40-45 CFH or 20 litres/min

DIFFUSIBLE HYDROGEN

Diffusible hydrogen conforms to relevant
approval agency designations.

DEPOSIT COMPOSITION :

Requirements (AWS A5.29): E81T1-Ni1J / E81T1-Ni1	%C	%Mn	%Si	%S	%P	%Ni	%Cr	%Mo	%V
Requirements (AWS A5.29): E81T1-Ni1J / E81T1-Ni1	0.12 max	1.50 max	0.80 max	0.03 max	0.03 max	0.80 - 1.10	0.15 max	0.35 max	0.05 max
Test results* (with 100%CO2)	0.03	1.31	0.35	< 0.01	0.01	0.85	0.03	< 0.01	0.02