Name: YC-YD107(Q) Flux cored welding wire for Hard Facing
Brand: YICHEN
Availability: InStock

Product Details

Specifications

used for surfacing welding on low hardness under normal temperture,such as surfacing of worn axle.

YC-YD265(Q) Flux cored welding wire for Hard Facing

pecifications

Flux Cored welding wire for Hard Facing
Used for surfacing welding the surface which has abrasion resistance.

Welding wire for Hard Facing

Product Name	Chemical Composition of Deposited Metal%						Hardness(HRC)	Characteristics and Applications	Polarity	Diameter (mm)	Shielding Gas
Product Name	C	Si	Mn	S	P	Other	Hardness(HRC)	Characteristics and Applications	Polarity	Diameter (mm)	Shielding Gas
YC-YD107(Q)	≤0.20	≤1.00	≤3.50	≤0.03	≤0.03		≥22	Used for surfacing welding on low hardness under normal temperature , such as axle .	DC(+)	1.2-2.0	CO₂
YC-YD127(Q)	≤0.20	≤1.00	≤4.20	≤0.03	≤0.03		≥28	Used for surfacing welding under normal temperature on middle hardness, such as axle .	DC(+)	1.2-2.0	CO₂
YC-YD237(Q)	≤0.60		1.50-2.50			Cr5.00-10.00 Mo1.50-2.50 V0.50-1.00	≥50	Used for surfacing welding under nomal temperature on high hardess ,and repairing the parts of dredger,mining machinery.	DC(+)	1.2-2.0	CO₂
YC-YD350(Q)	0.10-0.20	0.40-1.00	1.30-2.00			Cr1.00-2.00 Mo≤0.50	≥350(HB)	Used for surfacing welding on low hardness under normal temperature and repairing of mining machinery.	DC(+)	1.2-2.0	CO₂
YC-YD450(Q)	0.15-0.30			≤0.03	≤0.03	Cr11.00-15.00	≥45()	For surfacing welding roller and over-heat steam valves.	DC(+)	1.2-2.0	CO₂
YC-YD257(Q)	0.40-0.60	0.40-1.00	1.00-3.00			Cr5.00-7.00 Mo1.00-2.50	55-60	Used for welding the high temperature and high load roller hard surfacing.	DC(+)	1.2-2.0	CO₂
YC-YD255Q	0.20-0.70	1.00-3.50		≤0.03	≤0.03	Cr6.00-9.50	HRC≥50	Used for the high degree of hardness strut roller, the agriculture and so on welds with the machinery	DC(+)	1.2-2.0	CO₂or 80%Ar + 20%CO₂
YC-YD256Q	0.20-0.80			≤0.03	≤0.03	Cr4.00-7.00 W0.50-2.00 V0.20-1.00	HRC≥50	Used for surfacing welding under normal temperature on high hardness ,repairing the parts of high strength of high abrasion resistance.	DC(+)	1.2-2.0	CO₂or 80%Ar + 20%CO₂
YC-YD252Q	0.20-0.80			≤0.03	≤0.03	Cr4.00-7.00 Mo0.50-2.00	HRC≥50	Used for surfacing welding under normal temperature on high hardness ,repairing the parts of high strength of high abrasion resistance	DC(+)	1.2-2.0	CO₂
YC-YD507M_O	≤0.20	≤0.50	≤1.75			Cr9.00-14.00 Mo≤1.00	HRC≥37	For surfacing welding medium temperature high-pressure valves.	DC(+)	1.2-2.0	CO₂
YC-YD265MQ	0.10-0.50	≤1.0	≤2.0			Ni≤2.5 B1.0-4.0	HRC60-65	For surfacing welding the surface which has resistance to abrasion.	DC(+)	1.2-1.6	CO₂
YC-YD517(Z)	≤1.00					Cr8.00-16.00 Mo≤2.50 ≤3.50	HRC≥45	For surfacing welding medium temperature high-pressure valves.	DC(-)	1.6-2.0