About the use of raw materials and application of  gasflow drying machine

For raw materials with heavy humidity which is above 12%, it is necessary to install a dryer before further process. This air current type dryer can reduce the humidity of wood materials below 12% per time. The cost of this air current dryer is much lower than rotary dryer.

For this type it is can be used to dry wood sawdust, , rice husk, biomass powder , which is the pre-processing for making pellet, briquette, biomass fuel, etc.There is a screw conveyor designed for feeding the material, thus saving much labor.When operating, put the wet material in through the hopper, and the hot air will mix and dry  and then discharge at the cyclone. The professional design make the dryer can dry from the moisture 20-40% to final 8-12%. Which is perfect for making pellet, briquette, etc.

Introduction of   gasflow drying machine

1). Single Stove Sawdust dryer:
The Moisture reducing rate of the sawdust dryer is 8-12%. This sawdust dryer is equipped with one hot air boiler, it is suitable for drying raw material with moisture content less than 20-35%.If the moisture content of the raw material is higher than that, it will need several times of drying to achieve the requested moisture content for briquetting,palletizing.
2). Double-Stove Sawdust dryer:
This double stove sawdust dryer is a newly developed dryer with two hot air boilers, it is suitable for drying raw material with moisture content of 20% -50%, it can reduce moisture from 20%-50% to 8-12% via only one passage.

Characteristics of  gasflow drying machine

1. The selection of hot  sawdust dryer  dryer models depend on the original moisture content of raw materials;
2. Materials are suspend in the hot air flow, material contact area wih hot air is large, hot airflow type dryer heat transfer coefficient is higher compacted with the ordinary dryer.
3.wood dust sawdust dryer  is simple, occupy smaller wet area, so it's very convenient for smaller working site.
4. Wide applicability, wood dust sawdust dryer  can be used for various powder materials, mainly sawdust, crushed straw, rice husk and so on.

Working principle  of  gasflow drying machine

Wet materials are input into the hopper, the fuel boile generates hot air which mixes with wet materials and thn is sucked into the pipes by the exhaust blower quickly. And then hot air is flowing and going thought the curving pipes and buffer(drying chamber)of dryer, thus wet materials is finished to dry, and The dried materials are expelled out the exhaust bower(fan)

Parameter of the  gasflow drying machine

The structure of  gasflow drying machine

Gongyi Xiaoyi Mingyang Machinery Plant is located in Zhengzhou City, which is the biggest manufacturing base of charcoal making machinery. And we are the one of the earliest and largest manufacturers of renewable fuel & energy equipments and related machinery.

After 15 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. our products and are widely accepted in both domestic and world market, and also exported to more than 30 countries, such as England, Russia, Sweden, Poland, Iran, Sudan, South Malaysia, Indonesia, Vietnam, etc.  

We have got many certificattion such as CE, ISO9001,BV ,etc.

if you are interested in our machine ,  please contact me,We'll quote our best price