WXC Series Centerless Lathe(commonly known as peeling machine)is a new generation high-efficiency lathe machine which is specialized in processing of metal bar surface such as slender shaft. It can not only quickly remove defects on the surface of round steel such as decarburization layer and cracks, but also realize relatively high precision and roughness. It is especially suitable for processing of super long round steel bar, with working efficiency several times of the traditional processing technology.
    This machine is mainly applied in the production of bright material and bright steel bar, and in the field of machinery manufacturing, auto parts, bearing production, spring manufacturing, military enterprises, the production and processing of slender shaft, titanium bar, copper bar, aluminum bar, magnesium bar and other non-ferrous metal bar or tube, and in the field of other machinery equipment manufacturing for material preparation.

    WXC series of centerless lathe includes CNC type and semi - automatic type.Semi automatic type is operated both hydraulically and manually. For example, tool is adjusted manually, feeding and extracting are realized with hydraulic controlled clamping device, and auto material loading and unloading are finished with pneumatic and electric controlled device. Operated with ease, high in cost performance, this machine is quite suitable for small or medium enterprises which requires lower degree of automation.

Chip Conveying Device:

Function: To discharge iron dust from chip-extracting mouth which is at the bottom of    cutter head seat. 

Structure: Chain-scraper chip cleaner is supplied by accessory manufacture, iron dust and coolant fall down to chip cleaner via bottom of cutter head, coolant falls down into water groove of machine body via hole. Iron dusts are expelled by chain scraper and intensively collected.

Hydraulic press system

  Function:Provider the relevant parts of equipment with working hydraulic oil according to design requirement and offer their working movement.

Constitute :this production line has one set of hydraulic unit , which is on the right rear of the machine body. It consists of pumping set generator, various controlling valves, hydraulic tank and hydraulic pipeline. Connected by pipeline, oil tank and connector need to be distributed into everywhere of equipment.

The oil and gas lubrication system is especially designed to provide the effective lubrication for the high-speed rotating components, and is a reliable and economic method of lubricating for the high-speed spinning bearing. The lubricating oil has to be Great-Wall brand(or better brand with higher quality) mechanical oil or anti-wear hydraulic oil.

host machine and loading &unloading table:

Host is composed of a bed, spindle, oil air lubrication system, front clamping feed in, clamp car, rear clamping extracting, front guide, middle guide, rear guide,  driving components.

The cutting liquid circulation

cooling system is mainly composed of circulating pump, pipe, nozzle etc.

The circulating pump delivers the cutting liquid in the tanks to the nozzle near the cutting head through pipes, and cutting liquid is directly sprayed to the cutter and peeling chip. Most heat generated from the bar peeling is taken away by cooling liquid, which together with the peeling chip, falls down to the chip removal mouth, and flows back to water tank through pipe

     Series WXC centerless lathe is the high-efficiency lathe which is specialized in rough

 and precise processing of the metal bars surface. It removes the decarburized layer, 

cracks and other defects from the surface of the bars with high precision.In the working 

process, the metal bar doesn’t rotate and just walks forward. The cutter tools are driven to 

rotate by the cutter head to rotate fastly to peel the surface of the bars.

Advantages compared with the general lathe

1. The over-long metal bars or the wire rods can also be processed.

2. The precessing speed: 1~12m/min which is several times faster than the general lathe.

3. High precision. The diameter tolerance  ≤IT9 while the surface roughness ≤6.3μm after peeling.

   The surface roughness can be less than 0.8μm if our straightening machines are used afterward.

Technical Parameters

     Our machines has been used in the preparation procedure of the following mechanical equipments manufacturing,such as slender shaft, hydraulic pneumatic components, bearings, springs, auto parts, textile machinery, cold forging  material processing, instrumentation, steel pipe, cutting tools, engineering machinery, sports equipment etc.. They can also be widely used in copper, titanium, aluminum, magnesium industry, petroleum, electric power, Bridges and other industries, for example, piston rod, optical axis, bolt, spring, gear rack, toothed bar, stainless steel bars, copper bars, titanium bars, aluminum bars, magnesium bars, bearing ring, tiebar roller pin, pin , light bars, screw, mandrel, petroleum- drill pipe, steel cable, pipe billet, etc. 

Q:Who are you? Trade Company or manufacturer?

A: We are manufacturer and we have our own trade company.

Q: When the product can be delivered?

A:  Commonly the lead time will be within 3~4 months after receiving 50% deposit or L/C.

Q:What about payment term?

A:We accept T/T,L/C.

Q: I don't know how to install your frame machine?

A:we will dispatch professional technicians to customer factory

    for machine installation and training. 

If you have any questions, please feel free to contact us at the following: