steel tube peeling machine, buy 150mm to 350mm WXC350S black bar peeling machine on China Suppliers Mobile

Product Details

Introduction of bar peeling machine

Introduction of composition

There are two main parts --main machine and auxiliary machine

1.Main machine consists of the bed,main bearings,ail/oil lubrication system,front-clamping pinch feeding and rear-clamping extracting,front-guide and middle-rear guide system,main driving system etc.

2.Air/oil lubrication system is specially designed to solve the lubrication of main shaft

bearings with highspeed rotation.It’s composed of pump,oil and air distribution block

and air processing components.

3.Cutting liquid circulation cooling system consist of recycle water pump,pipeline,

nozzle etc.

4.High pressure water pump takes the cutting liquid cooled from reservoir through

pipeline transporting the near to the nozzle of cutter head,until spraying on the

tools and scraps.Then take away most the cutting heat and enter into chip conveyor

mouth of the bottom of cutter head,through the pipeline reflow reservoir for cooling.

5.Chip conveyor is provided by our supplier.The scraps through chip conveyor

mouth to be taken to the chain plate and driving belt move with the scraps.

Finally,the scraps are centralized collection.

6.Hydraulic system consists of pump set of motor,all kinds of control valves,

hydraulic oil tank,hydraulic pipeline etc.Though controlling the cylinders of front-clamping pinch feeding and rearclamping extracting to realize clamping and

loosening for the bar.

7.Electrical system includes power supply system and control system,by 1

power distribution cabinet and 1 button station integrated operation,implement

pinch before and after the main transmission system,feeding system,cooling

system,hydraulic system,the electrical control of chip conveyor and

auxiliary machine.

Product Application Presentation

Main parameters for your reference

Specification		WXC350S
RAW MATERIALS	Diameter Range(mm)	Φ200~Φ355
	Raw Material Length(mm)	≥3500
	Tensile Strength (Mpa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.50
	Diameter Tolerance	According to GB 702-2004 second group
	Roundness(mm)	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25~50μm
FINISHED GOODS	Diameter Range	Φ205~Φ350
	Unilateral Cutting Depth (mm)	0.25~10mm
	Diameter Tolerance	≤h9 (standard tolerance grade)
	Surface Roughness(Ra)	≤3.2μm
	Roundness(mm)	≤0.03
Feeding Cutting Speed(m/min)	0.1-2.0(for continuous chips and high strength and hardness should reduce the speed)
Cutter Head Rotational Speed(rpm)	36-288r/min(3-stage variable speed )
Main Machine Motor Power(KW)	315
Auxiliary Machine Motor Power(KW)	18.5+5.5(Four Poles)
Main Machine Outline Dimensions (LengthWidthHeight) m	8m 4m 3m (only for your reference)
Full Set Machine Outline Dimensions (including auxiliary machine) (LengthWidthHeight) m	22m X 8m X 3m (only for your reference)
Main Machine Weight (including auxiliary weight) (T)	45t (65t) (only for your reference)
Total Capacity(KW)	315kw
Compressed Air Source (user prepare by themselves)	0.5-0.8Mpa,1.8m3/min,0.8m3 gasholder,two-stage oil-water separator and compressed air freezing drier.