Huawei Wireless AP, buy HUAWEI Indoor Dual-band AP AP6010DN Access Point on China Suppliers Mobile

Product Details

Specifications

1. IEEE 802.11 a/b/g/n
2. wired link integrity check.
3. load balancing
4. AC hot standby
5. strong coverage capability

The AP6010DN is a standard indoor dual-band 2x2 MIMO access point (AP) that supports 2.4 GHz and 5 GHz frequency bands. It complies with IEEE 802.11a/b/g/nconnects a large number of users, and works as a Fit AP.

Characteristics

WLAN features

Compliance with IEEE 802.11a/b/g/n, providing a maximum rate of 300 Mbit/s for each radio
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
Automatic and manual rate adjustment (the rate is adjusted automatically by default)
WLAN channel management and channel rate adjustment
Automatic channel scanning (the AP6010DN scans channels used by other APs, measures their interference, and reports the scanning result to the AC to trigger channel adjustment)
Service set identifier (SSID) hiding
Signal sustain technology (SST)
STA power-saving mode
Control and Provisioning of Wireless Access Points (CAPWAP)
Automatic AC discovery

Network features

Compliance with IEEE 802.3u
Ports: Auto-negotiation of the rate and duplex mode and automatic switching between the Media Dependant Interface (MDI) and Media Dependant Interface Crossover (MDI-X) mode
1024 unicast MAC addresses
VLAN assignment based on SSIDs
VLAN aggregation on uplink Ethernet ports
4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs)
Uplink ports in tagged and untagged mode
DHCP client
PPPoE dialup
Centralized data forwarding and local data forwarding
STA isolation in the same VLAN
ACL
LLDP

Appearance

Ports

1.Console port.

2. ETH/PoE: 10/100/1000M port, which connects to the Ethernet. The port can connect to a PoE switch or a PoE power source to receive power.

3.Default: restores factory settings.

4. Power input port: 12 V DC.

Depolyment Scenarios

The AP6010DN is recommended for use in buildings with a simple structure, small area, a high density of users, and require a high capacity, for example, small-scale meeting rooms, bars, and entertainment places. The AP6010DN APs can be flexibly deployed in these places and work in both Fit AP and bridge mode.

Fit AP networking:

In this networking, the AP6010DN functions as a Fit AP that provides only data forwarding functions. The AC is responsible for user access, authentication, AP management, and configurations of security protocols, routing, and QoS.

WDS networking (point-to-point):

WDS networking (point-to-multipoint):

Specifications

Item		Description
Technical specifications	Dimensions (H x W x D)	50 mm x 180 mm x 180 mm
	Weight	0.4 kg
	System memory	128 MB DRAM 32 MB flash memory
Power specifications	Power input	DC 12V±10% POE Power:-48V DC
Power specifications	Maximum power consumption	10.2 W NOTE: The maximum power consumption depends on local laws.
Environment parameters	Operating temperature	-10°C to +50°C
	Storage temperature	-40°C to +70°C
	Humidity	5% to 95% (non-condensing)
	Waterproof grade	IP31
	Altitude	-60m to 4000 m

Antenna Parameters

Item	Description
Antenna type	Built-in antenna
Antenna gain	2.4G: 4dBi 5G: 5dBi
Maximum number of concurrent users	≤ 128
Maximum transmit power	20dBm(max) You can adjust the transmit power by 100%, 50%, 25%, or 12.5%, with a step of 3 dBm. You can adjust the transmit power from the maximum to 15 dBm, with a step of 1 dBm. NOTE Actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels	2.4 GHz 802.11b/g 20 MHz: 3 802.11n 20 MHz: 3 40 MHz: 1						5 GHz 802.11a 20 MHz: 21 802.11n 20 MHz: 21 40 MHz: 9
Channel rate	802.11b: 1, 2, 5.5, and 11 Mbit/s
	802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
	802.11n data rate (2.4 GHz and 5 GHz)
	MCS index	GI=800 ns						GI=400 ns
	MCS index	20 MHz (Mbit/s)			40 MHz (Mbit/s)			20 MHz (Mbit/s)			40 MHz (Mbit/s)
	0	6.5			13.5			7.2			15
	1	13			27			14.4			30
	2	19.5			40.5			21.7			45
	3	26			54			28.9			60
	4	39			81			43.3			90
	5	52			108			57.8			123
	6	58.5			121.5			65			135
	7	65			135			72.2			150
	8	13			27			14.4			30
	9	26			54			28.9			60
	10	39			81			43.3			90
	11	52			108			57.8			120
	12	78			162			86.7			180
	13	104			216			115.6			240
	14	117			243			130			270
	15	130			270			144.4			300
	NOTE Modulation coding scheme (MCS) index: determines the spatial flow quantity, modulation, coding rate, and data rate. Guard interval (GI): indicates the period in nanoseconds the radio listens between packets.
Receiver sensitivity	2.4 GHz 802.11b (CCK) -97 dBm @ 1 Mb/s -92 dBm @ 2 Mb/s -92 dBm @ 5.5 Mb/s -90 dBm @ 11 Mb/s			2.4GHz 802.11g (non-HT20) -92 dBm @ 6 Mb/s -91 dBm @ 9 Mb/s -90 dBm @ 12 Mb/s -87 dBm @ 18 Mb/s -83 dBm @ 24 Mb/s -80 dBm @ 36 Mb/s -76 dBm @ 48 Mb/s -74 dBm @ 54 Mb/s					5GHz 802.11a (non-HT20) -89 dBm @ 6 Mb/s -88 dBm @ 9 Mb/s -85 dBm @ 12 Mb/s -83 dBm @ 18 Mb/s -80 dBm @ 24 Mb/s -76 dBm @ 36 Mb/s -71 dBm @ 48 Mb/s -70 dBm @ 54 Mb/s
Receiver sensitivity	2.4 GHz 802.11n (HT20) -92 dBm @ MCS0/8 -89 dBm @ MCS1/9 -86 dBm @ MCS2/10 -82 dBm @ MCS3/11 -79 dBm @ MCS4/12 -74 dBm @ MCS5/13 -73 dBm @ MCS6/14 -71 dBm @ MCS7/15		2.4 GHz 802.11n (HT40) -89 dBm @ MCS0/8 -86 dBm @ MCS1/9 -83 dBm @ MCS2/10 -79 dBm @ MCS3/11 -76 dBm @ MCS4/12 -72 dBm @ MCS5/13 -70 dBm @ MCS6/14 -68 dBm @ MCS7/15			5GHz 802.11n (HT20) -88 dBm @ MCS0/8 -85 dBm @ MCS1/9 -84 dBm @ MCS2/10 -77 dBm @ MCS3/11 -74 dBm @ MCS4/12 -70 dBm @ MCS5/13 -68 dBm @ MCS6/14 -67 dBm @ MCS7/15				5GHz 802.11n (HT40) -85 dBm @ MCS0/8 -80 dBm @ MCS1/9 -78 dBm @ MCS2/10 -74 dBm @ MCS3/11 -71 dBm @ MCS4/12 -67 dBm @ MCS5/13 -65 dBm @ MCS6/14 -63 dBm @ MCS7/15