Huawei Wireless AP, buy HUAWEI Access Controller 10GE SFP+ uplink optical ports AC6605 on China Suppliers Mobile

Product Details

HUAWEI AC6605 Access Controller

Product Description

Product Appearance

Appearance

Ports

1. MODE button, switches working mode of indicators.
2. 20 10/100/1000BASE-T Ethernet electrical ports
Support 10M/100M/1000M auto-sensing.
Support PoE power supply on 20 ports.
3. Four combo ports
Support 10M/100M/1000M auto-sensing.
Support PoE power supply on four ports.
4. One ETH management port
5. One Mini USB port
6. One Console port
7. Two 10GE SFP+ uplink optical ports

Indicator Description

No.	Indicator/Button	Status	Description
1	On the rear panel: power supply indicator on the right	PWR1	Steady green: The power supply is running properly.
			Steady orange: When the device has two power supplies installed, the power supply in this slot is switched off, is not connected to a power source, or is faulty.
			Off: This slot has no power supply installed or the power supply in the slot is not working properly when only one power supply is installed.
2	On the rear panel: power supply indicator on the left	PWR2	Steady green: The power supply is running properly.
			Steady orange: When the device has two power supplies installed, the power supply in this slot is switched off, is not connected to a power source, or is faulty.
			Off: This slot has no power supply installed or the power supply in the slot is not working properly when only one power supply is installed.
3	System status indicator	SYS	Slow blinking: The system is running properly.
			Fast blinking: The system is being started.
			Steady orange: The temperature or functions of the device become abnormal.
			Slow blinking: The device has entered the dormancy mode.
			Steady red: After the device is registered, the system does not operate properly, or a power alarm, fan alarm, or temperature alarm is generated.
			Off: The system is not working.
4	State status indicator	STAT	Steady green: The service interface indicator is in the default mode. In this mode, the indicator indicates the state of each interface.
4	State status indicator	STAT	Off: The indicator is not in the State mode.
5	Speed status	SPED	Steady green: The service interface indicator indicates the speed of each interface. After 45 seconds, the service interface indicator automatically restores to the default mode (STAT).
5	Speed status	SPED	Off: The indicator is not in the Speed mode.
6	PoE status indicator	PoE	Steady green: The service interface indicator indicates the PoE status of each interface. After 45 seconds, the service interface indicator automatically restores to the default mode (STAT).
			Steady orange: At least one interface does not support PoE power or has a PoE error when mode switching is not performed.
			Off: The indicator is not in the PoE mode.
7	Mode switch button	MODE	When you press the button once, the SPED indicator turns green and the service interface indicators show the speed of the interfaces. When you press the button for a second time, the PoE indicator turns green and the service interface indicators show the PoE status of the interfaces. When you press the button for a third time, the STAT indicator turns green. If you do not press the button within 45 seconds, the indicators restore to the default status. That is, the STAT indicator turns green, and the SPED and PoE indicators are off.
8	Service interface indicator	24 GE electrical interfaces: numbered in the up-bottom and left-right orders and begins with 1. GE optical interfaces: Each optical interface has a corresponding indicator above it.	Meanings of service interface indicators vary according to the indicator status. For details, see the following table.
9	ETH interface indicator	The ETH interface has an arrow above it	Steady green: A link has been established to the interface. Blinks green: The interface is sending or receiving data. Off: No link has been established to the interface.
10	Mini USB interface indicator		Steady green: The Mini USB interface is in use. Off: The Mini USB interface is not in use.
11	Console interface indicator		Steady green: The Mini USB interface is not in use. Off: The Mini USB interface is in use.

Packaging & Shipping

Packaging Details: Original packing

Delivery Detail: Within 3 days after getting your receipt copy

Contact Way

Tel: 020-38182801
Cell phone:18503061911
Skype:suentek03
Wechat:18503061911
Whatsapp:18503061911
Website: http://suentek.en.china.cn
QQ:2355451103
Address:Rm3220-3221,Info Source Plaza,No.898 Tianhe North Rd.,Tianhe District.