12V remote control ultra high sensitivity vibration time delay module and relay module plus time delay three in one module

Can remote control opening and closing motion delay alarm module, according to about on a remote control button, relay to switch twice (load connected with the alarm of the alarm rings twice).Vibration time delay alarmAgain, clickAbove the remote control.Key,Relay on onceloadThen there's an alarm.That isAlarm (alarm), relay off (ie, alarm off) andVibration delay alarm off.

Use:
Vibration alarm trigger delay, can be directly used in car alarm,Vibration switch, andA variety of high current, high voltage applications.
Module features:
1Ultra high sensitivityVibration sensor, remote control;
2 vibration sensors can be connected in the detection position, length of 5 meters in sensitivity to no effect
3 provide the connection mode of power input, to meet the different needs of various;
4 with anti power reverse protection diode, effective protection products;
5 has a voltage IC, providing sufficient power stability;

6, using high performance timing CPU design, double PCB plate;

7, there is a power indicator (red LED) and vibration trigger delay time indicator (green LED);

8, the output can be connected with 250V AC 30A or DC 30V 30A load;

9, this module forOpen type vibration sensorWhen.Vibration sensor vibrationWhen the module start timeLight green, LED, relay, time end, green LED and release;

10,The triggering end such as timing, in delay time continuously receives the vibration trigger signal, the relay has been switched on, the relay will not disconnectAnd flash,shockThe trigger signal is stopped, from the newstartTime delay time relay to disconnect;

11, timing potentiometer adjustment time,The product design for 1-180 seconds adjustable, can also be customized time range;

12, the time error of 5%
Modules for use:
In the vibration sensorThe inductionVibration, relayPullDelay, start time, at this time, the green lightBright,The public terminal is connected with the normally open,Public end with the normally closed terminal is disconnected.

Product application:

1, with other kinds of sensors and relay module, can do all kinds of delay switch, directly with AC 220V products;

2, corridor delay switch, delay and energy saving products;

3, to do a variety of vibration sensor alarm delay trigger, such as earthquake alarm, anti-theft alarm

4, the vibration sensor can also be applied to auto start automatic trigger control related products;

5, machine stop alarm trigger delay.

Electrical parameters:
Power supply voltage: 12VDC
Current: more than 100mA
Load: 250V 30A AC or 30V DC 30A
Delivery list:
12V vibration sensor delay module a,With ultra high sensitivity vibration sensor, a remote control.

12V remote control vibration delay module wiring instructions:

Delay relay module control AC wiring diagram:

Time delay relay control module in DC wiring:

Need to bo can open the following links to purchase, attention is not complete, but can be installed under the board oh.

/item.htm? Spm=a1z10.3.0.83.7l8naV&id=20220372373?&