This module requires a voltage of One2V, normally open type switch trigger, One2 high level trigger.

Need 30A 12V high power trigger delay relay module can open the following link to buy:

/item.htm?id=18688701215

Product features:

1 MCU control, can be customized to other functions;
2 to provide a variety of power input connection, to meet a variety of different needs;
3 with anti - power supply connected to anti - protection diodes, effective protection of products;
4 with a high current voltage regulator, to provide adequate power supply;

5, the use of high performance timing CPU design, double PCB board;

6, there is a power indicator (red LED) and switch trigger timing instructions (green LED);

7, the output can be connected to AC 10A 30V or DC 10A 250V load;

9, this module forNormally open type trigger, when the switch is closed, the module will start time.Light green, LED, relay, time end, green LED off, the relay is released back to the closed end;

10, the trigger can beNormally open type vibration sensor, other normally open switch, or relay moduleEtc.;

11, the trigger end, such as the timing of the time, continue to receive a 12V trigger signal, the relay is always switched on, 12V trigger signal is disconnected, the time began, the delay time to the relay off;

12, there are time potentiometer adjustment time,The product design for 1-180 seconds adjustable, can also be customized time range;

13, timing error in 5%

Product application:

1, with other kinds of sensors and relay module, can do all kinds of delay switch, directly with AC 220V products;

2, corridor delay switch, delay and energy saving products;

3, to do a variety of vibration sensor alarm delay trigger, such as earthquake alarm, anti-theft alarm

4, the vibration sensor can also be applied to auto start automatic trigger control related products;

5, machine stop alarm trigger delay.

Electrical parameters:

Voltage: voltage 12V

Current: greater than or equal to 100mA

Load: 250V 10A AC or 30V DC 10A

Time time:1-180 seconds can be adjusted, can also be customized time range.

Product application:

1, with other kinds of sensors and relay module, can do all kinds of delay switch, directly with AC 220V products;

2, corridor delay switch, delay and energy saving products;

3, to do a variety of vibration sensor alarm delay trigger, such as earthquake alarm, anti-theft alarm

4, the vibration sensor can also be applied to auto start automatic trigger control related products;

5, machine stop alarm trigger delay.

Electrical parameters:

Voltage: voltage 12V

Current: greater than or equal to 100mA

Load: 250V 10A AC or 30V DC 10A

Time time:1-180 seconds can be adjusted, can also be customized time range.

12V trigger delay switch wiring instructions:

Delay time adjusting potentiometer:

Time is adjustable,Reverse timeIncrease the time needle,ShunThe needle to reduce the time,1-180 seconds adjustable, can also be customized time range

triggerTime delay switch12V alarm control wiring method:

Time delay switchConnection control method of alternating current:

Relay output terminal Pinout:

The relay control module communication equipment wiring diagram:

The relay module control DC wiring:

Matching bo, need to open the links below to buy

/item.htm?spm=a1z10.3.17.13.e49c01&id=20018268123&