Retread Tyre Machine Inflatable Buffer Machine  

1. Polishing the old pattern rubber to meet the needs of tire vulcanization. 
2. Radius of radian range is 400 ~ 800mm,also polish the appointed radian.             
3. Optional expansion rim:15"-16",17.5"-19.5",20"-22.5",20"-22.5"(width:250mm),20"-22.5"(width:300mm),20"-    22.5"(width:350mm). welcome special size order.      
4. Standard layout:15"~16", 20"~22.5" expansion rim and a dusty collector.      
5. Optional function: sidewall polishing and clean, tread circumferential measurements,  measure the thickness of remaining tread rubber, manually operation on polishing tire shoulder .   
6. Average polishing time: 3 mins. 

Tire retreading process:

Waste tire-inspect -washing and dry-Grind tire-Tire repair-Rubberized-Tread and considerate cooperation-vulcanization  

Benefits of tyre retreading:

*The benefits of retreading are  both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".

* To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tones per year!

* To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed