Used Tyre Retreading Machine/Inflated Tyre Grinding Machine

Capable for tire models from 650-1200(15" 16" 20" 22.5") Tehnical Parameters:

1.Rubbing head speed:2930 r/min. Powered by15kw

2.Clamping wheel speed: 42r/min 3.Rubbing tool model: R4-25 4.Total electricity power: 22kw

Cold tire retreading buffing machine Functions:

1 to buff the used tyre so that used tyre roof will form a clean and rough surface convenient for interfusion of used tyre and new material of procured tread.

2 to buff used tyre roof so that the size of circumference as required will be obtaine

Tire retreading process:

Waste tire-inspect -washing and dry-Grind tire-Tire repair-Rubberized-Tread and considerate cooperation-vulcanization  

Benefits of tyre retreading:

*The benefits of retreading are  both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".

* To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tones per year!

* To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed