Tyre Retreading Machine/Tyre Buffer  

Buffing machine use for gitting rid of the old pattern rubber on the suface of tyre.                         

1. Polishing the old pattern rubber to meet the needs of tire vulcanization.                                        

2. Radius of radian range is 400 ~ 800mm,also polish the appointed radian.                                  

3. Optional expansion rim:15"-16",17.5"-19.5",20"-22.5",20"-22.5"(width:250mm),20"-22.5"(width:300mm),20"-22.5"(width:350mm). welcome special size order.
4. Standard layout:15"~16", 20"~22.5" expansion rim and a dusty collector.                             

5. Optional function: sidewall polishing and clean,  tread circumferential measurements,  measure the thickness of remaining tread rubber, manually operation on polishing tire shoulder . 

Why choose tire retreading business?

1 Market high need

2 High profile but low cost

3 Goverment support

4 Environmental

Benefits of tyre retreading:

*The benefits of retreading are  both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".

* To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tones per year!

* To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed.

Tire retreading process:

Waste tire-inspect -washing and dry-Grind tire-Tire repair-Rubberized-Tread and considerate cooperation- vulcanization