Used Tyre Retreading Machinery/Solution Mixer

1. Put the Solvent gasolines and recycle cushion gum with appoint rate into it and then mix, and for temporary storage                                                                     

2. Assemble the anti-explosion motor and power switch, when the gas volatilize meet the electirc spark,it is very easy explosion.

3,good sealing quality, avoid the gas volatilize.  

Tire retreading process:

Waste tire-inspect -washing and dry-Grind tire-Tire repair-Rubberized-Tread and considerate cooperation-vulcanization  

Benefits of tyre retreading:

*The benefits of retreading are  both environmentally friendly and cost-efficient! When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberized for a "new tyre life".

* To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tones per year!

* To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed