Product Details

woodchips dryer

Product Description

Brief introduction of woodchips dryer

1. woodchips dryer refers to send the wet woodchips, wood chips to the drying cylinder continuously by the screw conveyor. In the transmission and dispersion of high speed heat

flow, make the wet material moisture evaporate,than get the dry powder or dry granular products.

2. The woodchips dryer under the influence of spray torch and rotary cylinder ,hot wind and

the material touch thoroughly, complete dry. Also suit for drying fiber material , sawdust, grass etc ,its simple structure, convenient to use welcomed by the new and old customers.

Working principle of the woodchips dryer

Material to be dried enters the rotary type dryer, and as the dryer rotates, the material is lifted

up by a series of internal lifting flight lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing throughthe hot gas stream as it falls. cyclone dryer also can be widely used to dry other lump and powder materials, and it is very simple to operate.

The parts of the woodchips dryer - draught fan, gearing device, reducer, cyclone, etc .

The features of woodchips dryer

1, large intensity of drying, because the highly dispersed material in the air, so the drying effect of surface area of particles is extremely great.

2, short drying time, moisture is controlled.

3, new type wood chips dryer has simple structure, cover small floor area, easy to build and

repair.

4, large capacity, high thermal efficiency. When drying the non-combined water, the thermal

efficiency can reach up to 60%.

Technology parameters of woodchips dryer

Model (mm)	Inclination (%)	Rotate speed (r/min)	Air inlet temperature (°C)	Power (KW)	Production capacity(t/h)	Weight (t)
Φ600x6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Φ800x8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Φ800x10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Φ1000x10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Φ1200x10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Φ1200x12000	3-5	3-8	≤700	11	2-6	14.8
Φ1500x12000	3-5	2-6	≤800	15	3.5-9	17.8
Φ1800x12000	3-5	2-6	≤800	18	5-12	25
Φ2200x12000	3-5	1.5-6	≤800	18.5	6-15	33
Φ2200x18000	3-5	1.5-6	≤800	22	10-18	53.8
Φ2200x20000	3-5	1.5-6	≤800	30	12-20	56
Φ2400x20000	3-5	1.5-5	≤800	37	18-30	60
Φ3000x20000	3-5	1.5-5	≤800	55	25-35	78
Φ3000x25000	3-5	1.5-5	≤800	75	32-40	104.9

If any interest to our woodchips dryer, kindly let us know the raw material , size and initial moisture of the raw meterial, the requirements of discharging moisture, capacity , etc . We'll give quick and efficiency response with pictures, technical data, best factory price .

Which kind of material suitable ?

Weilite brand new design woodchips dryer is widely used in straw briquette fuel, charcoal plant

production line, sawdust pellet fuel, sawdust briquetting, farming and animal husbandry and other industries. Such as drying cornstalk, soybean straw, cotton stalks, wheat straw, sorghum stalk, wood sawdust, wood shavings, sawdust, ginkgo leaf and mulberry leaves just like this kind of agricultural fiber materials.

The woodchips drying machine in customer's working site