Specifications

be used at -18 'c for saving meats and fishes
compressor power: 2x80 w
evaporator areas 15 square meters

DD-3/15 Evaporative Air Cooler For Cold Storage

THIS TYPE: DD-3/15 can be used at -18°C for saving meats and fishes , and this type chiller cooling capacity indicates: T library = -18°C ΔT=T-T0=7°C, library fin space is 6 mm.

Technical parameters

model	POWER (w)	CAPACITY Δ T=7 °C (W)	EVAPORATOR AREAS (M2)	gw(kg)
DD-3/15	2x80	3000	15	48

 

FAN (380V)(220V)			MELTS FROST ELECTRIC HEAT PIPE (220v)		INTO THE LIQUID (MM)	BACK TO STEAM(MM)
AIR-VOLUME (m3/h)	DIAMETER (mm)	RANGE (M)	COIL PIPE (KW)	WATER PAN (KW)
2x2290	300	8	1x1.0	1.0	12	19

Installation dimension

model	A	B	C	D	E	F	E1	E2	E3	drain(size)
DD-3/15	1140	400	460	270	930	100	/	/	/	3/4''

1. The housing is in plastic-sprayed coat or rolled, iron plate or aluminum paned, best in corrosion protection, beautiful in shape.

2. Original coil arrangement to reduce the side resistance. The aluminum fins are fastened to the steel tubes by hydraulic expanding way, which is effective to reduce thermal contact resistance and improve thermal transfer.

3. After pressure test, wash with trichloroethylene to clean oil dirt, moisture, oxide and other impurities inside. As such, no blocking trouble after filling refrigerant in use.

4. Special fan motor, which is low in power consumption, large in air volume, low in noise, and far in air throw, guarantees good performance in humidity and low temp.

5. Equipped with U-shaped electro-thermal tube that's good-in insulation inside the coil, rational gap arrangement and power ability to achieve defrosting performance.

6. Groove-type channel clip, easy to install.And Filled with nitrogen before leaving factory. and We can also manufacture according your require.