Specifications

HJ Vertical mill is one kind of roller mill.
1.reliable quality
2.high efficient
3.energy saving
4.Easy operation

 

 

Mill model	Dia. Of mill (mm)	Average diameter of mill roller(mm)	Number of mill roller	Speed of mill disc (rpm)	Capacity (t/h)	Loading power(KW)
HJRM raw material vertical mill
HJRM13.20	1,300	1,100	2	43	25	200
HJRM16.20	1,600	1,180	2	45.77	26.4	200
HJRM18.30	1,800	1,120	3	43.16	43.9	330
HJRM19.30	1,900	1,180	3	42.01	50.4	380
HJRM20.30	2,000	1,250	3	40.94	57.8	430
HJRM22.30	2,200	1,400	3	39.04	77	580
HJRM23.30	2,300	1,450	3	38.18	83.5	630
HJRM26.30	2,600	1,600	3	35.91	108.1	810
HJRM30.30	3,000	1,700	3	33.43	126.9	950
HJRM30.40	3,000	1,400	4	33.43	160.8	1100
HJRM32.40	3,200	1,400	4	32.37	168.7	1200
HJRM32.40	3,200	1,500	4	32.37	188.7	1300
HJRM34.40	3,400	1,500	4	31.4	197.3	1400
HJRM36.42	3,600	1,700	4	30.52	231.7	1600
HJRM38.42	3,800	1,700	4	29.7	266	1900
HJRM40.42	4,000	1,800	4	28.95	307	2100
HJRM43.42	4,300	1,900	4	27.92	357.4	2500
HJRM46.42	4,600	2,060	4	27	436.2	3100
HJRM48.41	4,800	1,900	4	26.43	386.5	2700
HJRM48.42	4,800	2,060	4	26.43	449.8	3100
HJRM50.41	5,000	2,240	4	25.89	516.3	3600
HJRM53.41	5,300	2,360	4	25.15	595.6	4200
HJRM53.42	5,300	2,500	4	25.15	630.6	4400
HJRM56.42	5,600	2,500	4	24.47	655.7	4600

 

1) ISO9001
2) ISO14001
3) 40 Years manufacturing experience and design experience
4) OEM and ODM welcome
5) high efficiency

 

Introduction

HJ Vertical mill is one kind of roller mill. As requested ,it equip with 3 or 4 rollers. Each roller is composed of foxed roller, support of installation rocker arm and hydraulic system. Motive force unit is in the whole or a standard art. It can be arranged in two components, three components or four components around dill disc.

 

Work Principle

Raw material feed into discharge pipe through rotary discharger . Discharge pipe enter into the mill through the side or the center if mill disc with the help of gravity and air flow. Mill disc connect with the reducer constantly. Constant speed rotation of mill disc will distribute material with the function of pressure and friction.

Centrifugal force will make pulverized material at the edge of mill disc from the middle of the disc. Material off mill disc will enter into hot gas in the mill through air ring. Via the middle of the mill shell and enter into the Separator. During the process, material will exchange hot gas. The moisture will be evaporated .The rest moisture can reach 1%.Unpulverized material as request will be selected by the Separator and send back mill disc.

 

 

Features

Low noise

Low energy consumption

Quick control response

The vibration is small from start to stop

Strong adaptability

Small covering area

Easy adjustment

Excellent dry grinding capacity

Easy maintenance(no need to dismantle and can replace easily worn-out parts.)

Grind all kinds of different material

 

Standard parameter of HJMS slag vertical mill

Remarks: Elevation basis of mill capacity

(1)  Middle and easy abrasive of raw material(MFs)=0.9~1.0

(2)  Moisture of raw material is 15%

(3)  Granularity of fine material :4200~4500cm2/g

(4)  Moisture of fine material:0.5~1.0%

 

Technical parameter of HJCM standard coal vertical mill

Remarks: Elevation standard of mill capacity

(1)  Easy grindability of raw material HGI=55~60

(2)  The moisture of raw material is 10%

(3)  Grain of fine powder :80mmR3%

(4)  Moisture of fine powder:0.5~1.0%

 

Technical parameter list of HJRM raw material vertical mill

Remarks:Basic standard of mill selection:

(1)  Middle easy abrasive of raw material (MF)=0.9~1.0

(2)  The Max. moisture of raw material is 7%

(3)  The grain of fine material is 80μmR 12~15%

(4)  The moisture of fine material is 0.5~1.0%

(5)  The above condition suits limestione grinding and select it according to the character of the material.