Specifications
1.Low price and high reliability2.Installed with EMI filter,minimum wave
3.AC input power suitable for the world
| Model | DR-75-12 | DR-75-24 | DR-75-48 |
| Specification | |||
| DC output voltage | 12V | 24V | 48V |
| Output voltage rang(Note:2) | ±2% | ±1% | ±1% |
| Rated outpru current | 6.3A | 3.2A | 1.6A |
| Output current range | 0-6.3A | 0-3.2A | 0-1.6A |
| Wave and noise(Note:3) | 100mVp-p | 150mVp-p | 240mVp-p |
| Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note:5) | ±1% | ±1% | ±1% |
| DC output power | 75.6W | 76.8W | 76.8W |
| Efficiency | 76% | 80% | 81% |
| Adjustable range for DC voltage | 10.8~13.2V | 21.6~26.4V | 43.2~52.8V |
| AC input voltage range | 85~264VAC 47~63Hz;120~370DC | ||
| Input current | 1.8A/115V 0.9A/230V | ||
| AC Inrush current | Cold-start current 30A/115V 60A/230V | ||
| Leakage current | <3.5mA/240VAC | ||
| Overload proctection | 105%~150% Type:pulsing hiccup shutdown Reset:auto recovery | ||
| Over-voltage protection | 13.8~16.2V | 27.6~32.4V | 58~62V |
| High-temperature protection | ............... | ||
| Temperature coefficient | ±0.03%/(0~50) | ||
| Setup,rise,hold up time | 1000ms,60ms,50ms/230V | ||
| Vibraton | 10~500Hz,2G 10min,/1cycle,period for 60min,Each axes | ||
| Withsatnd voltage | Input and output internal:1.5KvAC,input and enclosure:1.5Kv AC,output and enclosure:0.5KvAC | ||
| Isolation resistance | Input and output internal,input and enclosure,output and enclosure:500VDC/100M | ||
| Working termperature and humidity | -10~+60(Refer to output derating vurve),20%~90%RH | ||
| Store temperature and humidity | -20 +85,10%~95%RH | ||
| Overall dimension | 78*93*56mm | ||
| Weight | 0.27Kgs | ||
| Safety standards | Meet UL 1012R requirement (Not apply for the mark) | ||
| EMC standards | Meet FCC PART15 J Conduction class B | ||
| Note:1.The testing condition for the paramenter above is:230VAC input,rated load,2570% RH,Temperature. | |||
| 2.Error.include the setting error,line stability and load stability.(Note:5) | |||
| 3.Wave test:adopting"A12"double wire for 20MHz and 0.1UF&47UF capacitor short-circuit for interrupting | |||
| 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. | |||
| 5.Load stability test:The load is from 0% to 100%. | |||
