Specifications

1.Low price and high reliability
2.Installed with EMI filter,minimum wave
3.AC input power suitable for the world

Model	DR-75-12	DR-75-24	DR-75-48
Specification
DC output voltage	12V	24V	48V
Output voltage rang(Note:2)	±2%	±1%	±1%
Rated outpru current	6.3A	3.2A	1.6A
Output current range	0-6.3A	0-3.2A	0-1.6A
Wave and noise(Note:3)	100mVp-p	150mVp-p	240mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±1%	±1%
DC output power	75.6W	76.8W	76.8W
Efficiency	76%	80%	81%
Adjustable range for DC voltage	10.8~13.2V	21.6~26.4V	43.2~52.8V
AC input voltage range	85~264VAC 47~63Hz;120~370DC
Input current	1.8A/115V 0.9A/230V
AC Inrush current	Cold-start current 30A/115V 60A/230V
Leakage current	<3.5mA/240VAC
Overload proctection	105%~150% Type:pulsing hiccup shutdown Reset:auto recovery
Over-voltage protection	13.8~16.2V	27.6~32.4V	58~62V
High-temperature protection	...............
Temperature coefficient	±0.03%/(0~50)
Setup,rise,hold up time	1000ms,60ms,50ms/230V
Vibraton	10~500Hz,2G 10min,/1cycle,period for 60min,Each axes
Withsatnd voltage	Input and output internal:1.5KvAC,input and  enclosure:1.5Kv AC,output and enclosure:0.5KvAC
Isolation resistance	Input and output internal,input and enclosure,output and enclosure:500VDC/100M
Working termperature and humidity	-10~+60(Refer to output derating vurve),20%~90%RH
Store temperature and humidity	-20 +85,10%~95%RH
Overall dimension	78*93*56mm
Weight	0.27Kgs
Safety standards	Meet UL 1012R requirement (Not apply for the mark)
EMC standards	Meet FCC PART15 J Conduction class B
Note:1.The testing condition for the paramenter above is:230VAC input,rated load,2570% RH,Temperature.
2.Error.include the setting error,line stability and load stability.(Note:5)
3.Wave test:adopting"A12"double wire for 20MHz and 0.1UF&47UF capacitor short-circuit for interrupting
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:The load is from 0% to 100%.