Specifications

We are manufacture of switching power supply from 1992.

1.Low price and high reliability
2.105°c output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave

Model Specification	S-50-5	S-50-12	S-50-15	S-50-24
DC output voltage	5V	12V	15V	24V
Output voltage error (Note2)	±2%	±1%	±1%	±1%
Rated output current	10A	4.2A	3.4A	2.1A
Output current rage	0-10A	0-4.2A	0-3.4A	0-2.1A
Wave and noise(Note3)	75mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note4)	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note5)	±1%	±0.5%	±0.5%	±0.5%
DC output power	50W	50.4W	50.4W	50.4W
Efficiency	71%	78%	78%	82%
Adjustable range for DC voltage	±10,-5%	±10%	±10%	±10%
AC input voltage range	85~132VAC/170~264VACselected by switch
Input current	1.3A/115V 0.65A/230V
AC impulse current	Cold-start current 18A/115V 36A/230V
Leakage current	<0.5mA/240VAC
Overload protection	105%~150%Type:TOLDBACK Reset: auto recovery
Over-voltage protection	……
High-temperature protection	……
Temperature coefficient	±0.03%°c(0~50°c)
Setup rise hold up time	200ms,100ms,30ms
Vibration	10~500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage	Input and output interval:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistance	Input and output interval,Input and enclosure,Output and enclosure:0500VAC/100M Ohms
Working temperature and humidity	-10°c~+60°c,20%~90%RH
Store temperature and humidity	-20°c~+85°c,10%~95RH
Overall dimension	1599738mm
Weight	0.5Kgs
Safety standards	Meet UL1012
EMC standards	……
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°c 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2,3,11must be knocked down.