Turnkey Solution for 3MW 5MW 10MW Annual Production PV solar panel production line
Application
Mainly used in Solar Mono-Si, Poly-Si crystalline Panel module assembly line.
We offer Turnkey solution for Solar Panel Production Line Equipment:
Main Production Line Equipment:
1.Semi/Full Automatic Panel Laminator
2.Solar Cell Tester
3.EL Module Detector Machine
4.Solar Panel Testing Machine
Auxiliary Production Line Equipment:
5.Solar Panel Framing Machine
6.Soldering ribbon cutting machine
7.Solar Cell Laser cutting/scribing machine
8. EVA/TPT transfer carrier
9.Cell string shelf Carrier
10.Ready material carrier
11.Module transfer carrier
12.Laying up station
13.Inspection station
14. EVA/TPT cutting station
15.Solar cell soldering station (interconnection & bus bar)
16.Reparing station
17.Solar cells sorting table
18.Cleaning table
19.Working table
20.Pneumatic sealant gun
21.Hydraulic pressure forklift
22.Power cable for machine
Main Technical Parameters of Class AAB Solar Cell Tester :
Light intensity: 100mW/cm2
Light intensity non-uniformity:≤±2%
Light intensity instability degree of irradiation:≤±2%
Test results consistency: ≤±0.5%
Test error of electrical properties:≤1%
Single flash time: 10ms-30ms continuous adjustable
Effective test range : 200×200mm/0.1W-5W
Measuring voltage: 0V-0.8V(resolution 1mV)
Measuring current: 0-20A(resolution 1mA)
Main Technical Parameters of Fiber Solar Cell laser cutting machine:
Laser wave length 1064nm
Laser power 20W (Pulse )
Scribing width 30µm
Max Scribing speed 260mm/s
Scribing accuracy +10µm
Working area 200X200mm
Working power 220V/50Hz/1kVA
Cooling method Air cooling
Work table Automatic Vacuum
Main Technical Parameters of Solar Panel Laminator:
Power Source: AC 380V, Three-phrase Five-wire system
Laminating area: 2200*1100mm, 2200*2200mm
Control Style: Automatic/ Manual
Laminating Cavity Height: 25mm
Temperature evenness: ± 1.5 °C
The temperature control precision: ± 1 °C
Temperature range: 30 to 180 °C
Exhaust velocity: 70 L/S
Working Vacuum degree: 200-20 Pa
Working power: 18KW
Air pressure needed: 0.5-0.8 Mpa
Pumping time: 5 to 6 min
Operating environment: Ambient temperaturn 0 to 50 °C
Ambient humidity: < 90 %
Main Technical Parameters of EL Detector:
Effective testing area: 1200*2100mm
Resolution: 6.1 Megapixels or 16 Megapixels
Sensitivity: can detect crack width less than 0.2 µm
Testing methods: uncontact free style
Power parameter: single-phrase 220V 10A, Max load currency 10A
Test fast and convenience: long time 1s- 60s (adjustable)
Working ambient temperature: 10-30 °C
Time of exposure: 0.1 s- 25s adjustable;
Class AAB Solar Panel Tester Main parameters:
Light intensity: 100mW/cm2
Light intensity non-uniformity: ≤±2%
Light intensity instability degree of irradiation: ≤±2%
Test results consistency: ≤±0.5%
Test error of electrical properties: ≤1%
Effective test range : 2000×1200mm/5W-300W
Measuring voltage: 10V-100V(resolution 1mV)
Measuring current: 0-20A(resolution 1mA)
Test parameters: Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp Panel Tester
Automatic Pneumatic Framing Machine Main parameters:
Framing size: Min:350×500*35MM Max:1150×2100*500MM
without bump horny
Difference of diagonal line : 1.5mm
Air cylinder, linear rail, steel structure
Solar Panel Production line Customer's Site:
Containers for solar panel production line equipment and raw materials.
Our certificates:
1) How many shifts you will work on solar panel production line each day?
2) What is the annual amount you will produce on solar panel production line, 5MW, 10MW or others?
3) What is the standard power of each solar panel you will frequently produce?
4) Do you need raw material such as: Aluminum Frame, Tempered Glasses, EVA film, TPT sheet,etc.?