Turnkey Solution for 3MW 5MW 10MW Annual Production PV solar panel production line     

Application

Mainly used in Solar Mono-Si, Poly-Si crystalline Panel module assembly line.

   We offer Turnkey solution  for Solar Panel Production Line Equipment:

Main Production Line Equipment:

 1.Semi/Full Automatic Panel Laminator

2.Solar Cell Tester

3.EL Module Detector Machine

4.Solar Panel Testing Machine

 Auxiliary Production Line Equipment:

5.Solar Panel Framing Machine 

6.Soldering ribbon cutting machine 
7.Solar Cell Laser cutting/scribing machine 

8. EVA/TPT transfer carrier 
9.Cell string shelf Carrier
10.Ready material carrier 
11.Module transfer carrier

12.Laying up station 
13.Inspection station 
14. EVA/TPT cutting station 
15.Solar cell soldering station (interconnection & bus bar) 
16.Reparing station

17.Solar cells sorting table 
18.Cleaning table 
19.Working table 

20.Pneumatic sealant gun 
21.Hydraulic pressure forklift 
22.Power cable for machine 

Main Technical Parameters of Class AAB Solar Cell Tester : 

Light intensity:                   100mW/cm2
Light intensity non-uniformity:≤±2%
Light intensity instability degree of irradiation:≤±2%
Test results consistency:  ≤±0.5%
Test error of electrical properties:≤1%
Single flash time:               10ms-30ms continuous adjustable
Effective test range :         200×200mm/0.1W-5W
Measuring voltage:          0V-0.8V(resolution 1mV)
Measuring current:          0-20A(resolution 1mA)

Main Technical Parameters of Fiber Solar Cell laser cutting machine:

Laser wave length         1064nm
Laser power                   20W (Pulse )
Scribing width                 30µm
Max Scribing speed       260mm/s
Scribing accuracy          +10µm
Working area                200X200mm
Working power              220V/50Hz/1kVA
Cooling method            Air cooling
Work table                    Automatic Vacuum

Main Technical Parameters of Solar Panel Laminator: 

Power Source:                             AC 380V, Three-phrase Five-wire system

Laminating area:                          2200*1100mm, 2200*2200mm

Control Style:                               Automatic/ Manual

Laminating Cavity Height:          25mm

Temperature evenness:             ± 1.5  °C

The temperature control precision: ± 1  °C

Temperature range:                   30 to 180 °C

Exhaust velocity:                        70 L/S

Working Vacuum degree:          200-20 Pa

Working power:                          18KW

Air pressure needed:                 0.5-0.8 Mpa

Pumping time:                             5 to 6 min

Operating environment:           Ambient temperaturn 0 to 50 °C 

Ambient humidity:                     < 90 %

Main Technical Parameters of EL Detector:

Effective testing area:      1200*2100mm

Resolution:                        6.1 Megapixels or 16 Megapixels

Sensitivity:                         can detect crack width less than 0.2 µm

Testing methods:             uncontact free style

Power parameter:            single-phrase 220V 10A, Max load currency 10A

Test fast and convenience:       long time 1s- 60s  (adjustable)

Working ambient temperature: 10-30 °C

Time of exposure:           0.1 s- 25s adjustable;

Class AAB Solar Panel Tester Main parameters:

 Light intensity:                                       100mW/cm2

Light intensity non-uniformity:                           ≤±2%
Light intensity instability degree of irradiation: ≤±2%
Test results consistency:                              ≤±0.5%
Test error of electrical properties:                     ≤1%
Effective test range :         2000×1200mm/5W-300W
Measuring voltage:          10V-100V(resolution 1mV)
Measuring current:               0-20A(resolution 1mA)
Test parameters:   Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp Panel Tester 

Automatic Pneumatic Framing Machine Main parameters:

Framing size:  Min:350×500*35MM   Max:1150×2100*500MM       

without bump horny 

Difference of diagonal line : 1.5mm

Air cylinder, linear rail, steel structure

Solar Panel Production line Customer's Site: 

  Containers for solar panel production line equipment and raw materials.

Our certificates:

1) How many shifts you will work on solar panel production line each day?

2) What is the annual amount you will produce on solar panel production line, 5MW, 10MW or others?

3) What is the standard power of each solar panel you will frequently produce?  

4) Do you need raw material such as: Aluminum Frame, Tempered Glasses, EVA film, TPT sheet,etc.?