Temperature PLC Control PV Module Laminator for Solar Panel Making
USD $18,000 - $20,000 /Set
Min.Order:1 Set
Jiangsu Keyland Laser Technology Co., Ltd.
Fuction: Lamination and solidification.
Application: Mainly used on monocrystalline silicon/polycrystalline silicon solar panel laminating.
Position in a production line:
Welding - laminated & solidified layer pressure - cutting edge - detection - cleaning - test -packing
1. Good temp uniformity due to oil heating.
2. Area laminating with different speed lower the debris rate obviously.
3. Deft design brings reliable and stable equipment.
4. Unique control system, automatic centralized control mode, data storage, analysis ability.
5. Emergency alrm system ensure safety of operator.
6. Flat work table easy to imput/output materials.
7. Opening cover suitable for 3 sides working.
8. High quality heating work table.
9. PLC & touch screen operating.
Technical Parameters | |||
Power supply: | AC380V, 3Phases, 5Wires | Control mode: | Touch screen |
Heating type: | Oil heating | Operation mode: | Manual/Auto |
Working vacuum: | 200-20Pa | Max open height: | Over 500mm |
Temp control: | PLC | Temp control precision: | ±1°C |
Lamination height: | 25mm | Temp uniformity: | ±1.5°C |
Air pressure: | 0.6-1.0 Mpa | Air flow: | 0.42—0.8m3/min |
Air exhaust time: | 5-6min | Laminating time: | 2-10min |
Temp Range: | 30-160°C | Working conditions: | Temp: 10-50°C Humidity: 0-90% Altitude: 0-2000m |
Model | Laminating area |
KLT01 | 2200*1100mm |
KLT02 | 2200*1750mm |
KLT03 | 2200*2200mm |
KLT04 | 2200*3600mm |
KLT05 | 2200*3600*2 |