Industrial Drying Oven For Rice Husk Sawdust Dryer Machine
Introduction of air flow drying machine :
Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.
Hot airflow type dryer:
A: Raw materials should be sawdust, suitable for drying the moisture20-50% Final moisture 8-12% .
B: Diameter of raw materials: <3mm & < 5mm.
C: Temperature of Hot Air: 180-250 °.
D: Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials.
E: This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.
F: The wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).
Double stove hot airflow type dryer:
This dryer is suitable for drying materials of moisture 30-60%. Wet material is input into the hopper. The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer can reduces the moisture to 8-12% one time with the advantages of lower cost consumption and high efficiency.
The main parameter of air flow drying machine :
The selection of drying plant models depends on the original moisture content of raw materials. we have two kinds of dryer machine,one is air flow type ,the other one is rotary drum type.
The technical data of air flow ones:
Model | Power (kw) | Capacity (t/h) | Drying the Moisture content | Weight (t) | The area of land occupied by ( m³) |
HJ-4 | 4 | 0.3-0.4 | 35% | 1 | 8*1.5*3.5 |
HJ-6 | 5.5 | 0.4-0.5 | 40% | 1.5 | 10*1.5*3.5 |
HJ-8 | 11 | 0.5-1.8 | 40-50% | 2.5 | 14*1.5*4.8 |
HJ-10 | 15+0.75 | 0.6-0.7 | 50% | 1.8 | 14*2*3.2 |
If the sawdust is too wet and you need the high capacity , you need use our drum dryer :
(click the picture learn more)
How to make the charcoal briquette with using sawdust :
1.Crush the raw material into small pieces (diameter is about 3-5mm).
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%.
3. Put the material into feed let of briquette machine.
4.Produce the briquette stick from biomass material without any additive.
5.Carbonized the briquette stick.
Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years.
There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) ,
production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine)
production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette)
and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.
Our machines have the best quality and we have got many certification such as CE, ISO, BV.
For one set we packed in standard container.For more sets machines, we pack them in the standard container.
(1)Pre-sales service
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.
If you need our product , you can communication with me in any way as follows.
If you need our product, please click"send".
Wood Sawdust Grass Leaves Rice Husk Pipe Dryer
Wood Sawdust Grass Leaves Rice Husk Pipe Dryer
Wood Sawdust Grass Leaves Rice Husk Pipe Dryer