Introduction of Kehua machine
• Professional dryer manufacture and strict quality control system
•Zhengzhou Kehua Industrial Equipment Co., Ltd main produce the rotary dryer, vertical dryer, mesh belt dryer, chain plate dryer etc drying machine and complete production line.
•Our company pay more attention to the product quality and our product is passed the CE and ISO authentication.
• Many export experience:Our product are experoted to Malaysia, India, Philippine, Northern Ireland of United Kingdom, Indonesia, Egypt, United States, etc.
• service: we will try our best to meet your demand about drying machine. At the same time, we also design according to customer's requirement. After buying, if you need us to install, we can arrange the engineer to guide you installation.
1.High Drying Efficiency and Great Drying Effect
2.No Pollution, No Repulsive Smell and No Noise
3.Wide Application and low Environment Requirement
4.Easy Installation
5.Simple Operation and Low Maintenance
6.Definite Safety
Rotary feeding dryer picture show
Working principle of rotary feeding dryer
The heat source of dryer is from combustion devices. This dryer adopts direct flow heating method. So the material should be sent to the shell by the feed chamber and feed chute. After that the material will be pushed backward by the spiral shoveling plate. As the dryer is located with a tilt, the material flows to the end by the gravity and circumduction meanwhile it is shoveled repeatedly by the shoveling plate to the upper end then comes down constantly, forming an even curtain in the drum and exchanging heat fully with the hot current in the drum. With the material being raised and scattered again and again, the moisture is dried gradually. Finally it is dried totally.
Rotary feeding dryer technical parameter
Model(mm) | Gradient(°) | Speed(r/min) | Power(KW) | Capacity(t/h) | Weight(t) |
ZKRDΦ600×6000 | 3-5 | 3-8 | 3 | 0.5-1.5 | 2.9 |
ZKRDΦ800×8000 | 3-5 | 3-8 | 4 | 0.8-2.0 | 3.5 |
ZKRDΦ800×10000 | 3-5 | 3-8 | 4 | 0.8-2.5 | 5.6 |
ZKRDΦ1000×10000 | 3-5 | 3-8 | 5.5 | 1.0-3.5 | 6.7 |
ZKRDΦ1200×10000 | 3-5 | 3-8 | 7.5 | 1.8-5 | 14.5 |
ZKRDΦ1200×12000 | 3-5 | 3-8 | 11 | 2-6 | 14.8 |
ZKRDΦ1500×12000 | 3-5 | 2-6 | 15 | 3.5-9 | 17.8 |
ZKRDΦ1800×12000 | 3-5 | 2-6 | 18.5 | 5-12 | 25 |
ZKRDΦ1800×14000 | 3-5 | 2-6 | 18.5 | 5-15 | 27 |
ZKRDΦ1800×20000 | 3-5 | 2-6 | 22 | 8-20 | 30 |
ZKRDΦ2000×18000 | 3-5 | 2-6 | 30 | 8-23 | 45 |
ZKRDΦ2200×18000 | 3-5 | 1.5-6 | 37 | 10-25 | 48 |
ZKRDΦ2200×20000 | 3-5 | 1.5-6 | 37 | 12-28 | 56 |
ZKRDΦ2400×20000 | 3-5 | 1.5-5 | 45 | 18-30 | 60 |
ZKRDΦ2800×2000 | 3-5 | 1.5-5 | 55 | 20-35 | 68 |
ZKRDΦ3000×20000 | 3-5 | 1.5-5 | 55 | 25-40 | 78 |
ZKRDΦ3000×25000 | 3-5 | 1.5-5 | 75 | 30-45 | 104.9 |
Related products
Kindly note
In order to provide you satisfacory product, could you tell me the follow question?
1. What the raw materials is?
2. What is the mositure before dying and after drying?
3.What the capacity per hour is?