Donguan Tangxia Shuangxin Hardware Products Factory
Our company was founded in October, 2000, specializing in the production of springs, axles, screws, plastic metal stamping parts and other metal parts. Our main production modes are designing and proofing based on drawings, concepts and samples provided by customers. We provide samples for customers for review, verification and confirmation and then put into production as follows:
Our company has 3000 square meters of production workshops and more than 60 employees divided into four workshops - spring / stamping / screw / axle:
1) Spring Department: with 8 sets of 502 computer omnipotent machines, 4 sets of computerized compression spring machines and supporting heat treatment / projector / pull pressure test machines. Daily output: 300000 pieces of profiled springs and 800000 pieces of compression springs
2) Stamping Department: with 15 sets of 10T-45T punches, 3 sets of wire cutting machines and a full set of hardware stamping mold equipment. Providing a full set of services, including proofing, molding, design and stamping. Daily output: 1200000 pieces of various types of metal stamping parts
3) Screw Department: with 45 sets of 0# - 2.5# heading / roll machines. Daily output: 3000000 pieces of M1.2 ~ M8 3.5MM ~ 120MM plastic and alloy screws, tacks and rivets.
4) Axle Department: with 21 sets of semi-automatic / automatic toy axle machines. Daily output: 2000000 pieces of #1.0 ~ #8.0 various axes / rubbing spent axes.
In terms of quality control, we stress the concept of "quality is the life of our enterprise", using the first three pieces product inspection and the whole production inspection ways for strict quality control. Following the requests of RoHS and Heavy Element, we send products to the third party notarization institute for internationally recognized inspection, with complete inspection report. Our factory has our own salt spray machines and can test all kinds of metal surface treatment of anti-rust effect, in order to ensure the quality of our products.
In terms of product technology, our factory has a group of professional engineering and technical personnel in the processes of design and production, providing professional advice, converting the concepts from guests into controlled products and helping customers to solve professional problems and reduce the production costs. Each department has a number of professional chefs, with the most advanced equipment in the industry, improving our efficiency, quality and stability to produce high quality and inexpensive products.
In the processes of following up samples / production, we have a number of sales personnel who will make all-out efforts and make quality / delivery / price / needs as per your requirements to meet your expectations as far as possible.
In the terms of credibility, we guarantee the quality of our products, adhere to business ethics and keep commercial secrets.
If you have this need, please do not hesitate to contact us! We are glad to receive your calls. Thank you for your support!
Our company has 3000 square meters of production workshops and more than 60 employees divided into four workshops - spring / stamping / screw / axle:
1) Spring Department: with 8 sets of 502 computer omnipotent machines, 4 sets of computerized compression spring machines and supporting heat treatment / projector / pull pressure test machines. Daily output: 300000 pieces of profiled springs and 800000 pieces of compression springs
2) Stamping Department: with 15 sets of 10T-45T punches, 3 sets of wire cutting machines and a full set of hardware stamping mold equipment. Providing a full set of services, including proofing, molding, design and stamping. Daily output: 1200000 pieces of various types of metal stamping parts
3) Screw Department: with 45 sets of 0# - 2.5# heading / roll machines. Daily output: 3000000 pieces of M1.2 ~ M8 3.5MM ~ 120MM plastic and alloy screws, tacks and rivets.
4) Axle Department: with 21 sets of semi-automatic / automatic toy axle machines. Daily output: 2000000 pieces of #1.0 ~ #8.0 various axes / rubbing spent axes.
In terms of quality control, we stress the concept of "quality is the life of our enterprise", using the first three pieces product inspection and the whole production inspection ways for strict quality control. Following the requests of RoHS and Heavy Element, we send products to the third party notarization institute for internationally recognized inspection, with complete inspection report. Our factory has our own salt spray machines and can test all kinds of metal surface treatment of anti-rust effect, in order to ensure the quality of our products.
In terms of product technology, our factory has a group of professional engineering and technical personnel in the processes of design and production, providing professional advice, converting the concepts from guests into controlled products and helping customers to solve professional problems and reduce the production costs. Each department has a number of professional chefs, with the most advanced equipment in the industry, improving our efficiency, quality and stability to produce high quality and inexpensive products.
In the processes of following up samples / production, we have a number of sales personnel who will make all-out efforts and make quality / delivery / price / needs as per your requirements to meet your expectations as far as possible.
In the terms of credibility, we guarantee the quality of our products, adhere to business ethics and keep commercial secrets.
If you have this need, please do not hesitate to contact us! We are glad to receive your calls. Thank you for your support!
Location:
Dongguan Guangdong China
Total Employees:
101 - 200 People
Annual Revenue:
Below US$1 Million
Main Products:
CNC Milling Parts ,Stamping Parts ,Auto Lathe / CNC Lathe Parts ,Spring ,Screw ,Shaft
Main Markets:
Domestic Market , Northern Europe , North America , Mid East , South America , Southeast Asia , Eastern Asia , Africa
Factory Size:
5,000-10,000 square meters
Factory Location:
No.7 Qinghu Road,Qinghutou,Tangxia Town,Dongguan City Dongguan,Guangdong
Number of Workers:
101 - 200 People
Name:
ISO9001
Issue Date:
2012-06-29
Expiry Date:
2014-06-28
- Professionally Laser Cutting Service OEM Precision Custom Aluminum Copper Parts Fabricators Precision Metal Stamping Bending Welding Laser Cutting Parts
- Laser cutting/ bending/welding custom sheet metal fabrication Metal surface treatment
- Custom stainless steel sheet fabrication,metal case fabrication,custom metal case
- High precise Machining parts stainless steel laser cutting service
- High precise Machining parts stainless steel laser cutting service
- Custom laser cutting service and Machining parts Engineering vehicle accessories
- METAL FINISHING aluminum oxidation aluminum parts
- Machining parts China high precision OEM sheet metal fabrication
- aluminum oxidation electrophoresis spraying METAL FINISHING
- Machining China Machining parts Metal surface treatment
- Aluminum die-casting parts Aluminum alloy products
- Custom High Precision CNC Metal Laser Cutting Service
- Precision custom laser cutting service
- Custom stainless steel sheet fabrication China OEM
- ODM/OEM professional stainless steel 316/303/304 sheet metal stamping parts with cnc laser cutting bending
- Professional drawing custom precision laser cutting service China manufacturing